-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Restore files after factory reset

Create an account on the HP Community to personalize your profile and ask a question
11-26-2020 11:39 PM
I recently had to change my pin when installing zoom. Later the same day I went to sign on and my computer said something about an error with pin. I couldn't sign in with either the old pin or new pin and I forgot my password. I did a reset and now all of my files are gone. Is there a way to get them back? Photos, pdf files etc?
11-27-2020 08:40 AM
Simple question -- but not a simple answer -- maybe so, maybe not.
Factory reset, which you should NOT have done, is known to erase the entire drive, causing you to lose everything in the process. So, it only did what it was supposed to do.
All you will be able to recover at best from the drive is personal data. You will not be able to recover settings, website information (including user accounts and passwords) or applications.
Your best bet for recovering data now is to do the following:
1) Remove the disk drive from the old PC. If this is a SATA hard drive or a SATA SSD, this is a simple thing to do. If this is an m.2 SSD, that could be either screwed to the motherboard or soldered to the motherboard. If the second, you would need to have a techician remove it for you, or you risk seriously damaging the PC doing it yourself.
2) If you have a desktop PC with a spare hard drive connector, then connect the old drive to that. If the old drive is a SATA drive, connect both the power cable and the data cable. (This adapter is illustrated below) If the old drive is an m.2 SSD, you will need a USB-to-mSATA cable.
3) Try to retrieve the files and folders you want to save from the old drive and copy them to the new PC.
If this does not work, then you need to do the following:
1) Download and install this utility on a working PC http://www.majorgeeks.com/news/story/recover_data_in_3_steps_with_minitool_power_data_recovery_free_...
2) Run the data recovery utility to see what can be retrieved from the old drive.
If that tool does not find what you need, an alternative is Recuva http://www.piriform.com/recuva
And, if that does not work well, the best tool out there is this one, but only the demo version is free https://www.runtime.org/data-recovery-software.htm
I am a volunteer and I do not work for, nor represent, HP