Startup fail and automatic repair enter.

[Kshneedshel]

I had never restarted my computer every but today I did and when I tried to start, first the windows loads the startup screen then when it's time to show the password windows, it displays some unusual code running and enters automatic repair.

[praveen196]

@Kshneedshel Welcome to HP Community!

I understand that you are getting an automatic repair error.

What is the product number of your computer? (Ensure you don't share any personal information such as serial, phone number, email ID, etc..). 

Please perform the below steps on the computer to run a System Test

- Shut down/Turn off the computer

- Once the computer is completely Shut down/Turned off

- Now press the power button once to turn on the computer and immediately start pressing/tapping the F2 key on the keyboard

- This should open the UEFI Diagnostic screen on the computer

- Please select System Test and then select Extensive Test

If the test is passed, you have to perform the recovery.

1. Shutdown the computer.  

2. Turn the computer back on again and repeatedly tap on the ESC until a Startup menu appears.  

3. Press F11 once for System Recovery.  

4. Choose the Keyboard Layout.  

5. Click on Troubleshoot.  

6. Go to Recovery Manager and click on System Recovery.  

Note : Back-up all your data as System Recovery will delete everything that you had saved or installed on the computer.  

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!