System quick test failed

[Rajeen]

I did an HP update on drivers and softwares in my laptop. After that I am getting the blue screen error.

I ran a System quick test and I got the folliwing failure

Hard Drive SMART Check: FAILED

FAILURE ID: 94XPXG-90Q9KL-MFGGQK-60E303

PRODUCT ID: 2VL77PA#ACJ

blue screen

[Paul_Tikkanen]

Hi:

The error code reported, Hard Disk 1 SMART Hard Drive Detects Imminent Failure, means the hard drive is about to fail, or has failed, needs to be replaced and the operating system reinstalled.

If you can still get into Windows, back up any files you want to keep onto a portable hard drive.

Then replace the hard drive (SSD).

That looks like a relatively new model and if it is still under warranty, contact HP technical support for assistance under the warranty.

If it is no longer under warranty...

Below is the link to the service manual for your notebook.  The SSD R & R procedure can be found in chapter 5.

http://h10032.www1.hp.com/ctg/Manual/c05638816

After you replace the SSD, you can reinstall W10 for free as follows...

You can make a W10 USB flash drive installer with the Microsoft Media Creation Tool, using an 8 GB flash drive using another Windows PC, if your PC is not working.

https://www.microsoft.com/en-us/software-download/windows10

If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.

Here are the steps to create the W10 USB flash drive installer...

Select Download tool now, and select Run.If you agree to the license terms, select Accept.

On the What do you want to do? page, select Create installation media for another PC, and then select Next.

Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. You want 64 bit.

Select which media you want to use:

USB flash drive. Plug in a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.

Then you can reinstall the drivers and available software from the PC's support page.

https://support.hp.com/us-en/drivers/selfservice/hp-envy-13-ad100-laptop-pc-series/16851062/model/18...