The laptop does not respond to the power button

[DarkShaper]

There was an attempt to install Mac OS Big Sur on an HP Pavilion 15-e058sr laptop. Everything was already ready for installation, turned on the laptop, went into the BIOS and turned off Legacy Boot and Secure Boot to boot into OpenCore and then boot into the macOS Big Sur installer. The installer started, after that I saw that there were 4 pictures on the screen (4 screens on one screen). I had to exit the Mac OS installer to fix 4 screens, and since I couldn't exit the installer, I "urgently" turned off the laptop by pressing the power button for a long time. Then I decided to go into the BIOS to turn Legacy Boot and Secure Boot back on to boot into Windows 10, but I noticed that the laptop stopped responding to pressing the power button. I also noticed that if you connect a USB flash drive and press the power button, the flash drive indicator lights up and immediately goes out, the laptop does not turn on in any way, even before the BIOS.
What I tried to do - 1. I disconnected the battery and tried to turn on the laptop from the network - the result is the same, the laptop does not respond to the power button. 2. Held the power button for a few seconds and minutes to reset the BIOS settings - nothing has changed. 3. Disassembled the laptop and disconnected the BIOS battery connector to reset the BIOS settings - the result is the same, nothing has changed. 4. I tried to write a recovery flash drive in this way - Instruction for Recovery BIOS  , I did everything according to the instructions - the laptop does not respond to long presses of the Windows + B buttons and the power button, it does not respond to long presses of the Windows + V buttons and the power button either. Please help me solve the problem and tell me what the problem is 😞

[DarkShaper · Accepted solution]

The problem is solved by disconnecting the BIOS battery for a period of 1 day.

[Altina1]

restar my pc