• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP 15-bs234wm Intel Pentium N5000 Quad Core 4GB 500GB 15.6-inch Windows 10 Laptop
Microsoft Windows 10 (32-bit)

i was trying to reset my intel pentium windows 10 laptop and it was, then it went to the blue screen that shows u the percentage left. once it reach 100% the laptop kept restarting with the hp screen and welcome loading circle like the blue screen said it would, but it’s been taking hours and nothings happened yet. it still kept restarting i try pressing the power button but nothing happens it just pauses and when i press it it again it just continues restarting over and over again.

1 REPLY 1
HP Recommended

@fatimaaaaa 

Somehow, the Factory Reset has taken on the value of an Urban Legend that is a Miracle Cure for any ailing PC. Not only does it rarely fix the PC, if there is an underlying hardware issue with the PC, it will make matters WORSE by leaving the PC in an unusable state.

Even if there is NOT an underlying hardware issue, the reset puts Windows back to where it was weeks or months ago -- and this will then automatically launch hours or days of Windows Udpates that will bring your PC to a grinding halt, driving the processor up to 100% and the disk utilization to 100% as well. Both of these do NOTHING to speed up the PC.

The HP Factory Reset function relies critically on the contents of the Recovery partition being intact. If those contents get corrupted, which can happen either due to hard drive failing or due to Win10 Upgrade from an older OS, the reset simply will not work -- and will TRASH the PC in the process.

So, you go from having a SLOW PC, to having NO PC. That's not an improvement.

To check for hard drive failing, if your PC is new enough to support UEFI, you can use these steps to test the hard drive: http://support.hp.com/us-en/document/c00439024

If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) press the Function key for testing the hard drive (usually F2) and let it run.



I am a volunteer and I do not work for, nor represent, HP
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.