Try to reset my computer and have hp PC hardware diagnostics UEF i

[Zeny87]

Reset and only can see

Hp PC hardware diagnostics uef i

[WAWood]

@Zeny87 

This is NOT a criticism directed at YOU, but I really wish folks would quit routinely doing Factory Resets in attempts to repair an ailing PC. Not only does it rarely fix the PC, if there is an underlying hardware issue with the PC, it will make matters worse by leaving the PC in an unusable state.

The HP Factory Reset function relies critically on the contents of the Recovery partition being intact. If those contents get corrupted, which can happen either due to hard drive failing or due to Win10 Upgrade from an older OS, the reset simply will not work -- and will TRASH the PC in the process.

So, you go from having a SLOW PC, to having NO PC. That's not an improvement.

To check for hard drive failing, if your PC is new enough to support UEFI, you can use these steps to test the hard drive: http://support.hp.com/us-en/document/c00439024

If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu -- that will look similar to the image below ...

3) press the Function key for testing the hard drive (usually F2) and let it run.

Please report back the test results.