-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Unknown devices in Windows 7 device manager - dv7-2170us

Create an account on the HP Community to personalize your profile and ask a question
02-07-2010 02:58 AM - edited 02-07-2010 03:00 AM
I have a dv7-2170us laptop.
I performed a clean install with Windows 7 Home Premium 64-bit.
I used the drivers for this laptop model from the HP site.
I'm getting a few unknown devices in Device Manager.
I've tried un-installing the devices and re-installing to allow Windows to re-detect but no drivers are found. See pictures below, what devices could these possibly be referring to?
I have all the necessary drivers loaded that I am aware of and I installed any driver that looked valid from the HP drivers site.
Solved! Go to Solution.
Accepted Solutions
02-15-2010 06:52 AM - edited 02-15-2010 07:02 AM
EDIT: Everything works! Thanks for the tip Daniel. I googled how to identify hardware id's and came up with this site http://www.pcidatabase.com/ , punched in the device id's and bam, it WAS the card reader. Weird because it was working perfectly. But I downloaded the driver anyway and re-installed and this resolved the issue.
=============================================
I tried the Intel Chipset Utility, didn't work. Here's the hardware id's though:
If you look closely you'll notice that each of these devices are in fact different.
02-07-2010 11:06 AM - edited 02-07-2010 11:10 AM
That is the Card Reader. .not sure which you have JMicron or Realtek.Just try both. The other unknown is probably the HP ProtectSmart Hard Drive Protection software.
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
02-07-2010 12:13 PM
Try the Intel chip set update utility.
HP Envy 17", i7-8550u,16GB, 512GB NVMe, 4K screen, Windows 11 x64
Custom PC - Z690, i9-12900K, 32GB DDR5 5600, dual 512 GB NVMe, gen4 2 TB m.2 SSD, 4K screen, OC'd to 5 Ghz, NVIDIA 3080 10GB
02-07-2010 01:48 PM
Hi,
Go to: Control Panel -> Devices Manager
Click with right button of Your mouse on each yellow sign with exclamation mark ( ) and choose properties. Then go to ' Details ' tab and paste here Hardware ID . This way we will know what it is.
Below You've got example how to do it:
02-15-2010 06:52 AM - edited 02-15-2010 07:02 AM
EDIT: Everything works! Thanks for the tip Daniel. I googled how to identify hardware id's and came up with this site http://www.pcidatabase.com/ , punched in the device id's and bam, it WAS the card reader. Weird because it was working perfectly. But I downloaded the driver anyway and re-installed and this resolved the issue.
=============================================
I tried the Intel Chipset Utility, didn't work. Here's the hardware id's though:
If you look closely you'll notice that each of these devices are in fact different.
02-16-2010 12:21 AM
JMicron Card Reader Driver HP Pavilion dv7-2170us Entertainment Notebook PC
Released: 2009-10-01
Version: 1.0.32.1 A
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
=========
[Devices]
PCI\VEN_197B&DEV_2381="JMB38X SD Host Controller"
PCI\VEN_197B&DEV_2382="JMB38X SD/MMC Host Controller"
PCI\VEN_197B&DEV_2383="JMB38X MS Host Controller"
PCI\VEN_197B&DEV_2384="JMB38X xD Host Controller"
[JMCRModels]
;%PCI\VEN_197B&DEV_2381.DeviceDesc% = JM , PCI\VEN_197B&DEV_2381&SUBSYS_3624103C ; Quanta
%PCI\VEN_197B&DEV_2382.DeviceDesc% = JM , PCI\VEN_197B&DEV_2382&SUBSYS_3624103C
%PCI\VEN_197B&DEV_2383.DeviceDesc% = JM , PCI\VEN_197B&DEV_2383&SUBSYS_3624103C
%PCI\VEN_197B&DEV_2384.DeviceDesc% = JM , PCI\VEN_197B&DEV_2384&SUBSYS_3624103C
=========
PCI\VEN_197B&DEV_2381&SUBSYS_3624103C="JMB38X SD Host Controller" has Compobility ID "PCI\CC_080500".
========
Microsoft Windows XP/Vista/7 intergrated "SDA Standard Compliant SD Host Controller"
sdbus.inf
[Generic]
%PCI\CC_080500.DeviceDesc%=SDHost,PCI\CC_080500
%PCI\CC_080501.DeviceDesc%=SDHost,PCI\CC_080501
But Microsoft Windows XP/Vista/7 doesn't intergrated any MS/MMC/xD Host Controller with Compobility ID
"PCI\CC_088000"
=========
So you could used SD or SDHC, but had three unknowed devices with yellow exclamation marks main " Base System
Device":
PCI\VEN_197B&DEV_2382="JMB38X SD/MMC Host Controller"
PCI\VEN_197B&DEV_2383="JMB38X MS Host Controller"
PCI\VEN_197B&DEV_2384="JMB38X xD Host Controller"
02-09-2014 08:59 PM
Hello
I need help.. I rebooted my HP loptop and installed some drivers but I cant find the driver for "unknown device".. And my HDMI isn't working.. heres my Hardware ID for this..
Unknown device
USB\VID_138A&PID_0018&REV_0078
USB\VID_138A&PID_0018
thanks in advance...
02-09-2014 09:58 PM - edited 02-09-2014 10:02 PM
@jojogwapo
When you say you 'rebooted' your laptop are you saying that you reinstalled Windows? If so I assume that you did not use Recovery Manager on the laptop or Recovery Discs since you are missing drivers?
Have you installed the ATI Radeon Graphics driver from your support page? The device you posted hd id of is Validity Fingerprint Sensor-also on your driver page.
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***