What to do if it says WiFi is not enscripted?

[Fustrated5]

The printer will respond “no air printers”  found In a printout from the printer networks  infrastructure it showed

my WiFi was disabled

[asmita6658]

 Hi @Fustrated5

Welcome to the HP Support Community. I'd be happy to assist you with the printing issue. 

To better assist you -

1.) Are the printer and Mac connected to the same network?

2.) Is your router dual-band enabled i.e., both 2.4GHz and 5GHz? If yes, make sure the dual band has different SSIDs for 2.4G and 5G networks. 

Please try these steps to restore the network settings and re-configure the connection -

Step 1 Network Restore -

1. Press the Wireless button to access the Wireless Status menu.
2. Press the button next to Settings to access the Wireless Settings menu.
3. Select Restore Defaults.
4. Confirm the selection to restore defaults

Step 2 Reboot the devices -

1. Turn off the Router, Printer, and the computer.

2. Wait for 60 seconds.

3. Turn on the Router first and wait for all the lights to stabilize.

4. Turn on the printer and allow it to configure itself.

5. Turn on the computer.

Step 3 Run Wireless Wizard -

1. Press the Wireless button from the printer control panel, and then select Settings.
2. Scroll to select Wireless Setup Wizard, and then press OK.
3. Follow the on-screen instructions to set up the wireless connection.

Also, try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!