Won't boot, HP PC Hardware Diagnostics UEFI test all OK

[Elbow377]

CONFIG.INIALIZATION FAILED

[Riddle_Decipher]

@Elbow377 Here’s a few steps to help resolve the issue,

Let's start with running the chkdsk command in Windows 10:

1. Enter the Advanced Statup (Restart your computer while holding the Shift key).
2. Choose Troubleshoot > Advanced Options.
3. Select Command Prompt from the list of options.
4. When Command Prompt appears, enter the following lines and press Enter after each line in order to run it:
   • bootrec.exe /rebuildbcd
   • bootrec.exe /fixmbr
   • bootrec.exe /fixboot
5. Some users are also suggesting that you need to run additional chkdsk commands as well. To perform these commands, you need to know drive letters for all your hard drive partitions. In Command Prompt you should enter the following (but remember to use the letters that match your hard drive partitions on your PC):
   • chkdsk /r c:
   • chkdsk /r d:

   This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

6. Restart your computer and check if the issue is resolved.

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!