how can i make victus laptop stop charging at 80%

[mahmoud090]

how can i make victus laptop stop charging at 80% 

like charge frome 50% to 80% for example

[Nal_NR]

Hi @mahmoud090,

Welcome to the HP Support Community. 

I'd like to help!

I see that you want to limit the battery usage for your Victus ByVictus By HP 15.6 15.6-inch gaming Laptop 15-Fa1000. I see that you have already tried Adaptive Battery Optimizer. 

• I would like to inform you that the Battery Care Feature on the BIOS is to stop charging the battery at a certain percentage based on the customer preference.
•  If the battery percentage goes below the set level then it will start charging the battery again to the set level
•  If you do not see that option, try updating the BIOS and configuring Battery Care Function from the "System Configuration" tab of the BIOS as you have shown in the screen captures you uploaded.

For updating the BIOS Click here

You can also install Battery Health Manager. The Battery Health Manager feature provides a number of options designed to improve battery longevity and performance for various usage scenarios. The options are:

• Maximize my battery duration
• Let HP manage my battery charging
• Maximize my battery health

Maximize my battery health setting:

This setting maximizes battery health by lowering the maximum battery charge level to 80%.

Select this option if the computer stays plugged into the power adapter most of the time.

When this setting is selected, the battery charges until the charge level reaches 80%, then it stops charging until the charge level falls to 75%. While in this range (between 75% and 80%), the battery notification window shows that the battery is not charging.

Let HP manage my battery charging setting:

Charging behavior will automatically adjust to balance between maximizing battery health and maximizing battery duration.

When the computer is operating under heavy load or being used in hot environments, charging may behave like the Maximize my battery health setting. Under cooler conditions, it will behave like the Maximize my battery duration setting.

Maximize my battery duration setting:

The battery charges to 100%, then stop charging. Charging resumes when the charge level falls to 95%.

Select this mode if you need to have the battery fully charged when taking the computer off the charger.

NOTE: 

Using this mode may shorten the battery lifespan.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping.