-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- hp 2000 administrator or power on password

Create an account on the HP Community to personalize your profile and ask a question
10-12-2014 04:14 AM
I have a hp 2000-2b09WM windows 8. When I power it on I get a blue pop up that says "Enter Administrator Password or Power password" after three failed attempts I recieve a " System Disabled " with code 61085706. What can I do about this??
Solved! Go to Solution.
Accepted Solutions
10-12-2014 09:59 PM
Try >> 74983328
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
10-12-2014 04:29 AM
Hi,
Use the below code
61085706
1. Use the unlock code posted above to enter the BIOS
2. Disable all passwords that are enabled
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.
6. Then leave the BIOS by saving & exit option to save the changes.
Mahemac
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"
, I am speaking for myself and not for HP and I am not an HP Employee.
08-14-2015 07:13 AM
Hi,
Try the below code
67154394
Mahemac
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"
, I am speaking for myself and not for HP and I am not an HP Employee.