my laptop is stuck on failure configuring windows updates how do i fix it?

[lilly123456]

'Failure configuring windows updates reverting changes' has been stuck on my screen for the last 2 hours. its not frozen and i can move the mouse around but i dont know what to do. ive tried turing it off but thats not working and i dont want to reset it because im a student and i dont want to loose my work. please help

[IT_WinSec]

Hello @lilly123456

Welcome to the HP Support Community.

The solution would depend on what kind of update has been installed and what has failed exactly. Try these steps :

1. Try hard restart/hard reset.

Press the power on-button on your PC and hold it for about 5-10 seconds until your computer powers off completely.

Remove and unplug any external periferals and accessories.
Remove and unplug the batter of your computer (if it has an external battery)

Press once the power-on button to turn on the PC and wait if it will start now. Wait...

If it still fails to load properly, go ahead with the next steps

2. Perform some basic hardware checks to rule out hardware problem

- Please, shutdown the computer using the power button (pressed and hold for a few seconds until PC powers off)

- Power the computer back on.

As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap) before any logo appears. This should open a HP Startup Menu

- Choose F2 to open System Diagnostics. Follow the on-screen instructions to perform System Test >> Quick test.

This will check major hardware componets for issue (do it just in case) . Here is more info >> https://www.youtube.com/watch?v=6JXUp43ahHA

If there are no system checks/no quick tests, perform HDD (hard disk drive) and RAM check (memory check).

Let me know the test results. If the tests pass without issues, continue. If not, please, let me know

3. Repeat steps 1-2 above but when HP Startup menu opens, please choose F11 for System Recovery options.

The computer should boot from it's recovery partition to open you various recovery options. Note, that F11 option will only work if the recovery partition is there (not deleted) and intact. From there, you have prenty of options to choose from. Every HP computer comes with recovery partition present to assist in tough moments.

Attempt to "turn back time".

Please, perform System Restore first in an attempt to fix the issue. Please, restore back to previous days (restore point) where the issue was not present. Here is more info:

>> http://support.hp.com/us-en/document/c03327545#AbT5

>> https://www.tenforums.com/tutorials/4588-system-restore-windows-10-a.html

Hope this helps. Let me know how it goes. Provide your feedback/reply.