• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Any failures related to Hotkey UWP service? Click here for tips.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP Stream Laptop 14-ax0XX

my laptop says ;

No bootable device — insert boot disk and press any key. 

i have tried the memory and sotrage tests and also enabled legacy by pressing f10, but nothing has worked. 

could you please help?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Ayca 

Enabling Legacy mode will do you no good as Windows on this PC was preloaded using UEFI mode.  All that will do is ensure the PC will no longer boot.

 

Ordinarily, when a laptop no longer boots into Windows, this means that the boot records (known as the BCD) have become corrupted due to a failing drive and running diagnostics confirms this to be the case. Folks then replace the laptop drive, use the HP Cloud Recovery option and a 32GB USB stick to make recovery media, boot their laptop from that media and do a full restore.

With this PC, this is a much more difficult situation.

First, this PC does not actually have a laptop hard drive. Instead, it has a memory stick configured to work like a "disk drive" -- so, it has a stick of EMMC memory instead of an HDD. This is very small, usually 32GB, so it is too small to do any major Windows Updates since Windows takes up nearly all of the "drive".

Second, the SSD, unlike the SATA SSDs in other laptops, can not be replaced by the consumer. So, when it fills up, you can't replace it with a larger one. And when it fails, you can't replace it with a new one.

Thus, you can try running diagnostics to test the drive -- but if it fails, you will have to take this PC to a laptop repair facility to have them replace the SSD. You can not replace it yourself.

To check the drive you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) Press the Function key for testing the hard drive (usually F2) and let it run.



I am a volunteer and I do not work for, nor represent, HP

View solution in original post

1 REPLY 1
HP Recommended

@Ayca 

Enabling Legacy mode will do you no good as Windows on this PC was preloaded using UEFI mode.  All that will do is ensure the PC will no longer boot.

 

Ordinarily, when a laptop no longer boots into Windows, this means that the boot records (known as the BCD) have become corrupted due to a failing drive and running diagnostics confirms this to be the case. Folks then replace the laptop drive, use the HP Cloud Recovery option and a 32GB USB stick to make recovery media, boot their laptop from that media and do a full restore.

With this PC, this is a much more difficult situation.

First, this PC does not actually have a laptop hard drive. Instead, it has a memory stick configured to work like a "disk drive" -- so, it has a stick of EMMC memory instead of an HDD. This is very small, usually 32GB, so it is too small to do any major Windows Updates since Windows takes up nearly all of the "drive".

Second, the SSD, unlike the SATA SSDs in other laptops, can not be replaced by the consumer. So, when it fills up, you can't replace it with a larger one. And when it fails, you can't replace it with a new one.

Thus, you can try running diagnostics to test the drive -- but if it fails, you will have to take this PC to a laptop repair facility to have them replace the SSD. You can not replace it yourself.

To check the drive you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) Press the Function key for testing the hard drive (usually F2) and let it run.



I am a volunteer and I do not work for, nor represent, HP
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.