-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- pci data acquisition and signal processing controller driver...

Create an account on the HP Community to personalize your profile and ask a question
08-15-2020 08:47 AM
Pavilion 15-ab031tx
pci data acquisition and signal processing controller driver update - cant able to update this driver alone
Solved! Go to Solution.
Accepted Solutions
08-16-2020 06:54 AM
Hi:
See if you can manually install the driver as follows...
If you didn't delete the driver folders when you ran the above two drivers...
Click on the pci data acquisition and signal processing controller device needing the driver.
Click on the driver tab. Click on Update driver.
Select the Browse my computer for driver software option, and browse to the file folder that was created when you ran the driver. That folder will be located in C:\SWSetup\sp87257.
Make sure the Include subfolders box is checked and see if the driver installs that way.
If not, do the same thing but this time browse to C:\SWSetup\sp82025.
Make sure the Include subfolders box is checked and see if the driver installs that way.
08-15-2020 09:00 AM
Hi:
That device is installed by one of two drivers...
The chipset installation utility...
https://ftp.hp.com/pub/softpaq/sp87001-87500/sp87257.exe
Or the Intel Dynamic Platform and Thermal Framework Client Driver
08-16-2020 06:54 AM
Hi:
See if you can manually install the driver as follows...
If you didn't delete the driver folders when you ran the above two drivers...
Click on the pci data acquisition and signal processing controller device needing the driver.
Click on the driver tab. Click on Update driver.
Select the Browse my computer for driver software option, and browse to the file folder that was created when you ran the driver. That folder will be located in C:\SWSetup\sp87257.
Make sure the Include subfolders box is checked and see if the driver installs that way.
If not, do the same thing but this time browse to C:\SWSetup\sp82025.
Make sure the Include subfolders box is checked and see if the driver installs that way.