"undoing changes made to ur computer" "Attempting to recover installation"

[AI77-66]

I didn't update my window 10. I reset my laptop but after that my screen shows "undoing changes made to your computer" and then "Attempting to recover installation". Then screen blinks and continue this process.. 

[WAWood]

@AI77-66 

I can certainly understand the desire to do factory resets -- given the prevalent view that such an action, though extreme, will fix a variety of mysterious problems and return a troublesome PC to working condition.

Problem is -- that very often is NOT the case and if there is any hardware issue at all, which is nearly always the cause with a SLOW PC (which is why most folks do the factory resets), you end up trashing your PC and rendering it useless. So, you trade a SLOW PC for a non-working PC. Not a good trade -- and certainly not what you intended.

So if your PC was running real SLOW, or apps are not launching, then let's check for the drive failing, if your PC is new enough to support UEFI, you can use these steps to test the drive: http://support.hp.com/us-en/document/c00439024

If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) press the Function key for testing the hard drive (usually F2) and let it run.

If the test will not run or if it fails, that indicates that your drive has failed and would need to be replaced.

[AI77-66]

I did the quick hard drive test and the test passed but my problem is still here... 

[WAWood]

@AI77-66 

OK, then if the laptop is still trying to recover, this message often means that a recent Windows Update failed and Microsoft then tried to recover from that, but that failed, so it's trying over and over again -- and will never succeed because Windows Update got corrupted in the process. Unfortunately, this is NOT a new issue with Win10 Windows Updates.

This problem is very difficult, if not impossible to fix -- from the standpoint of making repairs and leaving your stuff intact. Some steps for trying this are listed below, but they are very hard to do and if they do not work, you are faced with doing a complete Windows reinstallation to get your PC back working again.

And if that is the case, you need to come back here and tell us what failed so we can provide instructions for things you can to do retrieve some data from your drive before you do a complete reinstallation.
----------

First thing you need to do is see if you can restart in Safe mode -- by doing these steps: https://www.tenforums.com/tutorials/2304-boot-into-safe-mode-windows-10-a.html

If you don't know how to start using Advanced Startup Options, then read this: https://www.tenforums.com/tutorials/2294-boot-advanced-startup-options-windows-10-a.html

Then, follow these steps to reset Windows Update: https://www.tenforums.com/tutorials/24742-reset-windows-update-windows-10-a.html

If these work, when you finally reboot, you should then be able to login to a working Windows desktop.

If these don't work, then report that back here as we will then have to provide you information on reinstalling Windows.

[AI77-66]

This didn't solve this. I need to reinstall the window.. 

Thnx fir ur quick response.