Adaptive Battery Optimizer

[Aliën]

Hi, 

So I want to enable and activate this feature in my BIOS but when I enable it and check if it is then it just sais; enabled/unactivated.

How do I activate this feature? 

Thanks!

Greets Aliën

[Nirvana_95]

Hi @Aliën 

Welcome to the HP Support Community. I see that you wish to activate Adaptive Battery Optimizer on your system. Do not worry, I am here to help you with it.

From what I understood, you are getting enabled/unactivated in your system's BIOS. That means the feature is ON, but no protective measures are active.

Please follow the steps shared below and keep me posted on the outcome of it.

Enable or disable Adaptive Battery Optimizer:

1. Start or restart the computer.
2. Press F10 to enter HP Computer Setup (F10 setup).
3. Select Configuration.
4. Change the status to Enabled or Disabled as desired.
5. Save the change and Exit.

Determine if protective measures have been activated:

1. Start or restart the computer.
2. Immediately press Esc to access the startup menu.
3. Press F2 to start HP PC Diagnostics UEFI.
4. Select Power > Battery.
5. Select Run Once.
6. Once the test completes, select Battery Details.
7. Check the Adaptive Battery Optimizer status.

For more information on it, you may use the link here. 

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping. 

[Nirvana_95]

Hello @Aliën

We haven’t heard from you in a while, this post is with reference to the thread you had created with your  

friendly neighborhood (HP Support Community). 

I would like to know if the resolution we provided worked for you? If you have any other queries, feel free to reply at any time, and thank you for being a valuable member of our HP Family. 

If you would like to thank us for our efforts to help you, go to the public post & give us a virtual high-five by clicking the "Thumbs Up" icon below, followed by clicking on the "Accept as solution" on my public post. 

Have a great day ahead!

[Nirvana_95]

Hi @Aliën 

I hope you are doing good.

We reached out but never heard back. Do you still need assistance? Let me know if there is anything else you need assistance with.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping. 

Have a great day! 

Thanks!