Bios Application Error 501

[Artyom2]

Hello all, today i tried open Bios on my notebook for installing other OS, but got issue:

"The HP BIOS Application selected is corrupt or missing. Please install the application and try again.

BIOS Application Error (501)"

However Windows opens after pressing ENTER, but i need open BIOS.

How i can fix this problem ?

[ub6424]

Hello @Artyom2 

Opening the BIOS Setup Utility
Access the BIOS Setup Utility using a series of key presses during the boot process.

1. Turn off the computer and wait five seconds.
2. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
3. Press f10 to open the BIOS Setup Utility.

See:

https://support.hp.com/us-en/document/ish_3912651-2318005-16

[ub6424]

Please report your results

[Artyom2]

i turned off computer, waited 5 seconds, but after starting computer and continuously pressing ECS, BIOS Setup Utility was not open. I pressed to ESC until the Windows opened, maybe BIOS Setup Utility was skipped because any error

[ub6424]

To help you I need to know the product number (p/n) of your notebook !

You will find this information on the back of your notebook printed in small alphanumeric letters.

The product number (p/n) is legally allowed information, just about the computer, no sensitive data.

It is allowed to post in public, no problem.

[Artyom2]

 B3X83EA#ACB

[ub6424 · Accepted solution]

(1) Connect Charger !

(2) Update BIOS

HP Notebook System BIOS Update (AMD Processors)

F.6A Rev.A

7.2 MB

Jun 11, 2013

Download

Why should you install the update ?

https://support.hp.com/us-en/document/ish_4123786-2338478-16

Quote: "

Updating the BIOS is recommended as standard maintenance of the computer. It can also help resolve the following issues:

• An available BIOS update resolves a specific issue or improves computer performance.
• The current BIOS does not support a hardware component or a Windows upgrade.
• HP Support recommends installing a specific BIOS update.

"

(3) Reboot and test again ...

[Artyom2]

It's working. Thank you so much!

[ub6424]

It was a great pleasure to help you

best regards