cancel
Showing results for 
Search instead for 
Did you mean: 
tfh46
New member
2 1 0 0
Message 1 of 4
222
Flag Post

Solved!

Click pad on my Pavilion 360

HP Recommended
Pavilionx360 2 in1
Microsoft Windows 10 (64-bit)

How do I disable the "touch to click" feature? If I go NEAR that pad, it takes me where I didn't want to go. It has a tap to right or left click(like a mouse) and that's OK but the lightest touch also clicks, driving me crazy(er)

1 ACCEPTED SOLUTION

Accepted Solutions
praveen196
HP Support Agent
HP Support Agent
10,488 10,491 472 748
Message 2 of 4
Flag Post
HP Recommended

@tfh46 Welcome to HP Community!

 

I understand that you would like to disable the touchpad.

 

Please provide the correct product number.

 

Update the touchpad drivers by clicking here, once done use the below steps.

To Disable the Tap to Click option for Synaptics touchpads:

  1. Click Start and then Control Panel.
  2. Select Classic View from the left side of the window.
  3. Double-click the Mouse icon and, then, select the Device settings tab.
  4. Click the Settings button and, then, Tapping.
  5. Un-select the Enable tapping checkbox and click OK.

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

View solution in original post

3 REPLIES 3
praveen196
HP Support Agent
HP Support Agent
10,488 10,491 472 748
Message 2 of 4
Flag Post
HP Recommended

@tfh46 Welcome to HP Community!

 

I understand that you would like to disable the touchpad.

 

Please provide the correct product number.

 

Update the touchpad drivers by clicking here, once done use the below steps.

To Disable the Tap to Click option for Synaptics touchpads:

  1. Click Start and then Control Panel.
  2. Select Classic View from the left side of the window.
  3. Double-click the Mouse icon and, then, select the Device settings tab.
  4. Click the Settings button and, then, Tapping.
  5. Un-select the Enable tapping checkbox and click OK.

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

View solution in original post

tfh46
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Thank you for responding to my problem,  My product number is 20to4UA#ABA  As you directed, I clicked on start (which is the Windows icon). Then there was no "control panel in site so I entered it into the search bar. When the control panel opened, there wasn't a list on the left and no classic view.  I did start poking around again to find I could go to "hardware and sound> touchpad> tapping. I unclicked enable and apply. That did it It's good now (as long as it doesn't reset when I turn the laptop on again) . without your reply, I wouldn't have polked around again. Thanks again!

0 Kudos
praveen196
HP Support Agent
HP Support Agent
10,488 10,491 472 748
Message 4 of 4
Flag Post
HP Recommended

@tfh46 

 

Thank you for the update.

 

In the future, if you have any other concerns. Please get back to us. We will assist you.

 

Have a nice day!! 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation