cancel
Showing results for 
Search instead for 
Did you mean: 
Pete2020
New member
3 1 0 0
Message 1 of 4
195
Flag Post

Cursor moving at the bottom center right of screen constantly

HP Recommended
HP ENVY x360-15-cp0008ca
Microsoft Windows 10 (64-bit)

My Cursor moving at the bottom center right of screen constantly, what could it be,disconnected wireless mouse and still doing it, please help, 

3 REPLIES 3
praveen196
HP Support Agent
HP Support Agent
10,488 10,491 472 748
Message 2 of 4
Flag Post
HP Recommended

@Pete2020 Welcome to HP Community!

 

I understand you are having issues with the mouse moving at the bottom center-right of the screen constantly. Don't worry as I have a few suggestions which should help you resolve this issue.

 

To provide you with an accurate solution, I'll need a few more details:

Did it happen after a recent software update?

Have you tried to update the Bios?

Have you checked if the issue persists even in the Bios screen?

 

In the meantime, let's try these steps here: 

 

Perform a Hard reset on the notebook

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a "Hard Reset". Use the following steps to perform a hard reset on a computer:

  1. If Windows is open, click Start and then Shutdown.

    If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.

  2. With the power off, disconnect the power cord from the back of the computer.

  3. With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.

  4. Reconnect the power cord and turn on the power.

Let's start off by checking If the mouse pointer keeps jumping to the top corner in the Bios: 

Boot the computer into the Bios screen and check if the mouse pointer jumps to the top corner of the screen.

 

1. Turn off your computer
2. Make sure you have connected the power cable
3. Turn on your notebook, as it is starting press the  F10 button repeatedly

I recommend checking if the issue appears on the BIOS screen (restart the computer and tap on F10 to access BIOS) 

This would confirm if it's either a hardware failure or an issue with the graphics card drivers so we may reinstall and update the drivers to fix the issue as mentioned above. 

 

If the issue doesn't seem to occur in the Bios, I would suggest here is to update the Bios, Chipset drivers on your PC from our HP support website, using this link.

You could also, download and install HP support assistant on your PC. It should automatically download and install the latest updates and drivers for your PC.

Refer this link to know how to use HP support assistant.

 

If the issue still persists, I would suggest here is to try these steps here: 

Check the Mouse options under control panel: 

Start → Control Panel → Mouse → Buttons tab.  

Check the box labeled "Use MS Office compatible scroll only."  

Also, check the box below labeled "Scroll in active window only." 

 
If the issue persists, attempt the below steps: 

Attempt using an alternate/external mouse.  

(If that works when the touchpad is disabled on Synaptic software, it would mean that it's a touchpad failure, 

However, if the external mouse doesn't work either, it could be a software/driver issue). 

 

Uninstall and reinstall the drivers for your mouse: 

Go to the Device Manager and select your mouse. Uninstall it and then restart your computer. During restart, your mouse driver will automatically be reinstalled. 

  • 1.   Click on Start and type ‘Device Manager’. 

  • 2.   Click Device Manager. 

  • 3.   Click + sign next to Mouse. 

  • 4.   Right-click on mouse entry and choose "uninstall". 

  • 5.   Restart your computer. 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

0 Kudos
Pete2020
Author
New member
3 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Hi. Last week my hdd failed meanwhile the cursor was going crazy. I replaced it by an 1tb ssd. So had to reboot and after all the updates still does same thing. I noticed that when it starts doing it If I unplug the power cord, magically it suddenly stops. How can a plug affect the mouse ? 

0 Kudos
praveen196
HP Support Agent
HP Support Agent
10,488 10,491 472 748
Message 4 of 4
Flag Post
HP Recommended

@Pete2020 

 

I understand your concerns.

 

Try updating the computer, this will install the latest updates -

 

Step 1 Windows Updates -

1) In the search box, type, and open Windows Updates.

2) Check for updates.

3) If the updates are available, click on install and restart the computer.

 

Step 2 Install updates using HP Support Assistant

  1. In the search box, type, and open HP Support Assistant. 
  2. Check for updates. 
  3. If the updates are available, click on install and restart the computer.  

Note: If you do not have HP Support Assistant installed, Click here to download the same.

 

Please update the BIOS.

 

Have a nice day!!

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation