-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Software and How To Questions
- Re: Driver needed for PCI Data Acquisition and Signal Proces...

Create an account on the HP Community to personalize your profile and ask a question
01-11-2017 02:40 AM
Hello,
Could you please help me to find the
PCI Data Acquisition and Signal Processing Controller driver for HP Pavilion Notebook - 17t-g000 CTO (ENERGY STAR) (Product number: K9F82AV)
I could not find it in HP download section. Also I was unsuccessful in Intel site.
Thank you very much!
Vlad.
Solved! Go to Solution.
Accepted Solutions
01-11-2017 02:16 PM
You're very welcome.
Try the Intel chipset installation utility from the link below and restart the PC.
The 2nd file down on the left side of the page is the auto install file.
If that doesn't work, then this should be the driver you need...
Intel Dynamic Platform and Thermal Framework Client Driver - Broadwell/Haswell:
This package contains the driver that enables the Intel Dynamic Platform and Thermal Framework firmware. Intel Dynamic Platform and Thermal Framework provide system temperature and power utilization information for the system thermal protection to function properly. This package is provided for supported notebook models running a supported operating system.
01-11-2017 07:21 AM
Hi, Vlad:
For what operating system do you need the driver for, and what processor does your notebook have?
It is either the Intel chipset installation utility, or the thermal dynamic driver you need, but the thermal dynamic driver is dependent on the processor series (5th gen core, pentium, etc).
01-11-2017 01:55 PM
Hi Paul,
Thank you for your reply - sorry I should have provided this information from the begginning,
My laptop operating Win7 64. The processor is Intel(R) Core(TM) i5-5200U CPU @2.20GHz 2,20 GHz.
Thank you ,
Vlad.
01-11-2017 02:16 PM
You're very welcome.
Try the Intel chipset installation utility from the link below and restart the PC.
The 2nd file down on the left side of the page is the auto install file.
If that doesn't work, then this should be the driver you need...
Intel Dynamic Platform and Thermal Framework Client Driver - Broadwell/Haswell:
This package contains the driver that enables the Intel Dynamic Platform and Thermal Framework firmware. Intel Dynamic Platform and Thermal Framework provide system temperature and power utilization information for the system thermal protection to function properly. This package is provided for supported notebook models running a supported operating system.
01-11-2017 05:52 PM
Hi Paul,
Thank you so much! the second package did solve the problem.
Sorry to trouble you more - there is one more driver missing for Universal Serial Bus (USB) controller driver for the same laptop - I cannot find it in the HP.com driver downloads.
Thank you very much again,
Vlad.
01-11-2017 06:07 PM
Anytime, Vlad.
Glad to have been of assistance.
For the USB3 driver, download, unzip and run the setup.exe file from the link below...