Enable "Power On When AC Detected" option on HP Victus laptop

[victus04]

Enable "Power On When AC Detected" option on HP Victus laptop

[Kuroi_Kenshi]

Hi @victus04,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding enabling the "Power On When AC Detected" option on an HP Victus laptop!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

Restart Your Laptop:

• Begin by restarting your HP Victus laptop.

Enter BIOS Setup:

• As your laptop begins to boot up, immediately and repeatedly press the F10 key. This should take you to the BIOS setup. On some models, you may need to press Esc and then select BIOS setup.

Navigate to the Power Settings:

• Once in the BIOS menu, use the arrow keys to navigate to the "Power" or "Advanced" tab. The exact tab name can vary depending on the BIOS version.

Enable the Power Option:

• Look for the option labeled "Power On When AC Detected," "AC Power Recovery," or something similar.
• If the option is available, select it and change its setting to "Enabled."

Save and Exit:

• After enabling the setting, navigate to the "Exit" tab or simply press the appropriate key (often F10) to save changes and exit.
• Confirm any prompts to save your changes.

Reboot:

• Your laptop should now reboot with the new settings.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,