GPU thermals

[evmox]

hello everyone... i downloaded and installed some software and drivers yesterday and after the restart, the fan noise got a littler louder than usual (btw, i've toned down my maximum processor state to 99% like a few days before the update). i checked the clock speed from the taskbar and it was going 3+ to almost 4 ghz even when its not supposed to but that only lasted for like 15 or 20 seconds. thereafter, it went back to 1.7-1.9 ghz and the fan noise also calmed down.

the problem though is that the thermals on my gpu. sometimes it would go up to 45 and even 46 degrees. before i installed the updates yesterday, it was always sitting below 40 and sometimes it even goes down to 36.

i would greatly appreciate if anyone can help me resolve this issue.

thanks ahead!

HP Laptop 15-fc0xxx
Product #: BX8B1PA#UUF
OS Version: 25H2

[Deep_World]

Hi  @evmox,
 
Welcome to the HP Support Community!

Thanks for reaching out!

Sorry for the inconvenience caused don’t worry let me help you.

To better understand the issue, could you please provide a few more details?

• Did the update you installed include BIOS or firmware changes, or was it mainly Windows/drivers/software?
• Are you noticing the higher GPU temperatures during normal usage (like browsing or streaming) or only when running heavier applications (games, editing software)?
• Have you observed any performance issues or throttling alongside the temperature changes?

Suggested troubleshooting steps

1. Check HP Support Assistant
   • Run HP Support Assistant to ensure all drivers, including chipset and graphics drivers, are fully up to date. Sometimes partial updates can cause thermal management changes.
2. Inspect Background Processes
   • After updates, Windows may run indexing or background tasks temporarily. Open Task Manager and check if any processes are consuming GPU/CPU resources unexpectedly.
3. Clean Air Vents and Ensure Proper Ventilation
   • Dust buildup or blocked vents can raise temperatures. Make sure your laptop is on a hard surface with good airflow.
4. Update BIOS (if available)
   • Visit HP’s official support page for your product (HP Laptop 15-fc0xxx) and check if there’s a BIOS update. BIOS updates often improve thermal management.
5. Run HP Hardware Diagnostics
   • Restart your laptop and press F2 to enter HP PC Hardware Diagnostics. Run a system test to check if the fan and thermal sensors are functioning correctly.

Your GPU temperatures (36–46 °C) are still within safe operating ranges. 

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 

Take care and have an amazing day ahead! 

Best regards,

Deep_World

[evmox]

good day maam/sir... the updates i installed were:
HP notebook system BIOS update (AMD processors)
HP connection optimizer
HP PC hardware diagnostic UEFI
Realtex RL8xxx wireless LAN drivers.

i've only been using this laptop for browsing and for watching videos through an HDD which i dont think would be the reason for the high thermals because whether the HDD is connected or not, i'd still get around 42-45 degrees.
i experience some throttling every one in a while but i think thats because i toned down the maximum processor state to 99% (i have a base clock of 2.0ghz).

those four updates i mentioned were all installed on 2/12/26.

honestly, i'm not literate enough in this field to determine which apps/processes are having high cpu/gpu usages and how to deal with them.

ive been placing my laptop in the same desk space before and after the updates so i cant really blame it on the vents. again... not an expert but like i said, same desk space.

"BIOS Version/Date AMI F.21, 10/16/2025" thats what it says from the system info. i consulted dr. google about this issue the other day and it said my version is up to date.

i wanna take the f2 diagnostics advice but cant really do it atm. probly some time later.

appreciate the response a lot. i know a temperature in the early to mid 40's is still safe but to think that i used to have 36-39 makes me feel a little disappointed! but thanks for this 🙂

[Deep_World · Accepted solution]

I know it’s disappointing to see numbers a bit higher than before, but rest assured your system is still operating safely. Thank you again for being proactive and cooperative it makes troubleshooting much smoother.

Thanks for letting us help you out! If you're all set, please mark this post as 'Accepted Solution' so I can do a virtual happy dance! 

If you need anything else, I'm all ears (or rather, all text). Just let me know! 

You're awesome, and I'm honored to have been your go-to guide today! 

Stay fantastic, and have an amazing day ahead! 

Best Regards,

Deep_World

[evmox]

yeah... still hoping though that they get to fix this by the next update. 36-37>>>>44-45, right? lol nevertheless, youre much appreciated!!! 

[Deep_World]

Hi @evmox,

I completely understand, It’s natural to hope that upcoming updates will smooth things out, and I really appreciate your patience while you keep an eye on this.

A huge thank you for marking this post as the 'Accepted Solution'! We're thrilled that we could help resolve your issue. 

If you have any more questions or need further assistance, please don't hesitate to ask. We're here to help! 

Thanks again for your confirmation, and we wish you an amazing day ahead! 

Best Regards,

Deep_World

[evmox]

well, in that case... i actually have another problem regarding the bluetooth of this laptop. the first few days after i bought this which was about a month ago or so, i would always try to connect my bluetooth headset and not even 20 or 25 minutes later it it stops receiving any sound from the laptop but it doesnt disconnect. its just connected and i dont hear anything from it. what i would always do in this situation is that i disconnect the headset and then reconnect it. 3 or 4 times out of 10, it would reconnect successfully and then same thing... gone after 20 mintues. i havent really resolved this issue and instead use my wired headset from then on. i'm not entirely sure if its the bluetooth thats the problem or the headset (its a baseus bowie headset).

[Deep_World]

Hi @evmox,

I’m really sorry to hear about the trouble you’ve been experiencing with your Bluetooth headset, especially when you just want to enjoy your music or calls without worrying about the connection dropping.

 Thank you for sharing the details  that helps narrow down what might be going on.

Here are a few additional troubleshooting steps you can try to see if the issue improves:

• Update Bluetooth drivers
  Go to Device Manager → Bluetooth → right‑click your adapter → Update driver. Outdated drivers are often the culprit for intermittent audio issues.
• Check power management settings
  In Device Manager, open your Bluetooth adapter’s Properties → Power Management tab. Uncheck “Allow the computer to turn off this device to save power.” This prevents Windows from putting Bluetooth into a low‑power state that can cut audio.
• Reset Bluetooth stack
  Turn Bluetooth off, restart your laptop, then turn Bluetooth back on. This clears temporary glitches in the Bluetooth service.
• Test with another Bluetooth device
  If you have access to another headset or speaker, try connecting it. If the issue repeats, the laptop’s Bluetooth may be the source. If not, the Baseus headset could be the one dropping audio.
• Disable audio enhancements
  Right‑click the sound icon → Sounds → Playback tab → select your headset → Properties → Enhancements tab. Check “Disable all enhancements.” Sometimes these interfere with Bluetooth audio.
• Windows updates
  Make sure your system is fully updated. Microsoft often includes Bluetooth stability fixes in cumulative updates
   

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 

Take care and have an amazing day ahead! 

Best regards,

Deep_World. 

[evmox]

i would deal with that problem maybe in another time. for now, i have another concern that i wanna ask if you could help me with... is there a way for my laptop to cap the charging to 80%? i tried looking for how to do it myself and even went to the bios settings but the option is also not available there.

[Deep_World]

Hi @evmox,

Thanks for your response. 

I completely understand your concern battery health is an important topic, and it’s great that you’re being proactive about it. Some HP laptops do have a feature called Battery Care Function or Battery Health Manager, which allows you to set a charging threshold (like capping at 80%). However, this option isn’t available on every model, and sometimes it’s only accessible through HP software rather than the BIOS.

In the meantime, here are a few troubleshooting steps you can try:

• HP Support Assistant: Open the app, go to Battery settings, and check if there’s an option for “Battery Health Manager” or “Battery Care Function.”
• Windows Settings: Some laptops allow partial charging through Power & Battery settings, though this is less common.
• BIOS Update: Even if you didn’t see the option before, updating your BIOS via HP Support Assistant or the HP website may unlock new features.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 

Take care and have an amazing day ahead! 

Best regards,

Deep_World