-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
- HP Community
- Notebooks
- Notebook Software and How To Questions
- HOW CAN I CHANGE DISK ID OF HARD DISK ?

Create an account on the HP Community to personalize your profile and ask a question
08-14-2022 10:17 AM
I HAVE UPGRADED MY LAPTOP WITH SSD, FIRST IT WAS ONLY HARD DISK, MY SSD SHOWS DISK ID 1 AND HARD DISK DISK ID AS 0, SO I WANT TO KNOW HOW TO CHANGE DISK ID OF OF SSD AS 0 AND HARD DISK AS 1 ? PLEASE HELP ME OUT. THANK YOU!
Solved! Go to Solution.
Accepted Solutions
08-14-2022 10:30 AM - edited 08-14-2022 10:36 AM
Hi:
You cannot change that unless you temporarily disconnect the 2.5" drive.
Run the notebook off the M.2 SSD only.
Then your M.2 SSD should become drive 0.
Then you can reconnect the 2.5" drive and it should become drive 1.
See the last reply on this discussion...
How to switch disk numbers: I want Disk 0 to be Disk 1 and Disk 1 - Microsoft Community
The other thing you can do is to not worry about it, because it doesn't matter.
08-14-2022 10:30 AM - edited 08-14-2022 10:36 AM
Hi:
You cannot change that unless you temporarily disconnect the 2.5" drive.
Run the notebook off the M.2 SSD only.
Then your M.2 SSD should become drive 0.
Then you can reconnect the 2.5" drive and it should become drive 1.
See the last reply on this discussion...
How to switch disk numbers: I want Disk 0 to be Disk 1 and Disk 1 - Microsoft Community
The other thing you can do is to not worry about it, because it doesn't matter.
08-14-2022 10:58 AM
SIR HOW DO YOU KNOW ALL ABOUT PC ?
HOW HAVE YOU INCREASED YOUR KNOWLEDGE ABOUT PC ?
CAN YOU GIVE ME SOME TIPS TO INCREASE KNOWLEDGE ABOT PC'S BECAUSE I AM VERY INTERESTED IN IT AND THANK YOU VERY MUCH FOR YOUR REPLY. LOOKING FORWARD FOR YOUR REPLY.
08-14-2022 11:15 AM
You're very welcome.
Most of what I have learned has been from reading the many different questions folks ask on this forum and then check to see what the answers are.
Other things I have learned over the years is just the way you did. 😊
Replacing/upgrading parts and asking questions before I did, if I had any questions.
Didn't find what you were looking for? Ask the community