-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Software and How To Questions
- I2C HID Device Code 10
Create an account on the HP Community to personalize your profile and ask a question
05-03-2022 07:15 AM
Hi, my laptop touchpad stops working randomly every 3-4 days. In the device manager under Human Interface Devices>I2C HID Device shows error code 10 the device descriptor failed .and only after disabling it and again enabling it the touchpad starts working again,,, its really very irritating... please help
05-03-2022 07:45 AM
The Code 10 error is one of several Device Manager error codes. It's generated when Device Manager can't start the hardware device, a situation usually caused by outdated or corrupted drivers.
A device may also receive a Code 10 error if a driver generates an error that Device Manager doesn't understand. In other words, a Code 10 error can sometimes be a very generic message indicating some kind of unspecified driver or hardware problem.
The Code 10 error could apply to any hardware device in Device Manager, though most Code 10 errors appear on USB and audio devices.
Try these tips to fix the error:
Restart your computer if you haven't done so already.
There's always the chance that the error Code 10 was caused by some temporary problem in Device Manager or with the hardware. If so, a reboot, like in many situations, might fix it.
Depending on what happened, some solutions might include: Reinstalling the drivers for the device. Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error.
- t's also very possible that installing the latest drivers for the device could correct the Code 10 error, even if these drivers were previously functional.
- Microsoft often releases patches for Windows, and some computers don't have the latest service packs installed, either of which might contain a fix for the Code 10 error.
It could also be a hardware problem that is causing the Code 10 error but you could try a repair install of Windows. If that doesn't work, try a clean install of Windows.