cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Vraj78
New member
5 1 0 0
Message 1 of 2
125
Flag Post

Issue in google meet after updating firmware.

HP Recommended
HP Laptop 14s-dk0093
Microsoft Windows 10 (64-bit)

Hii, I am using HP laptop 14s-dk0093. I faces issue in google meeting. I have changed browser also but the taskbar starts flickering and the speaker automatically mutes and unmutes and it seems like flickering. I faces this also with other video conferencing sites. So, I think there is some problem regarding drivers but I have already updated drivers. 

1 REPLY 1
praveen196
HP Support Agent
HP Support Agent
10,488 10,467 476 760
Message 2 of 2
Flag Post
HP Recommended

@Vraj78 Welcome to HP Community!

 

I understand that you are facing Issues in google meet after updating firmware.

 

Please perform the below steps and check.

 

Hard Reset:

1) Shutdown the computer.  

2) Unplug all the Adapter and peripherals connected.  

3) Remove the Battery. ( not for Built-in Battery computer ) 

4) Press and hold down the power button for 15 to 20 seconds.  

5) Plug-in the Adapter and put the Battery back into the computer if it's a (removable battery)

6) Try to turn on the computer and check, If the issue persists continue next step

 

Set BIOS default and restart:

  1. Restart your notebook.
  2. During startup, press F10 repeatedly until the BIOS menu is displayed.
  3. Once the BIOS menu is displayed, press F9 to restore factory defaults.
  4. Select Yes to confirm.
  5. Press F10 to save changes and exit.
  6. Select Yes to confirm.
  7. The computer restarts using the default settings.

Try updating the computer, this will install the latest updates -

 

Step 1 Windows Updates -

1) In the search box, type, and open Windows Updates.

2) Check for updates.

3) If the updates are available, click on install and restart the computer.

 

Step 2 Install updates using HP Support Assistant

  1. In the search box, type, and open HP Support Assistant. 
  2. Check for updates. 
  3. If the updates are available, click on install and restart the computer.  

Note: If you do not have HP Support Assistant installed, Click here to download the same.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation