I have HP pavilion DV6T-6000 CTO notebook bought in 2011. Its I7 processor and it came with Hp simplepass fingerprint login. It used to work fine. Few months ago, i upgraded to windows 10 but had some issues, so i went back to windows 7 from bootable windows 7 usb i got from some friend. There i needed to download all drivers one by one from HP website.
I downloaded validity finder print sensor and Hp simple pass 2011 as well. I installed and enrolled finger print.
But now it does not works for logging in to windows, but only after logging in , if i lock the window and use swipe, it works.
BUt why not to log in which it used to work originally.
I checked device manager - > bio metric device- > properties-> under power management . It shows two check box
1. Allow the computer to turn off device to save power - which is checked on
2. Allow this device to wake up the computer - This is unchecked and also disabled - Is this the reason for it to not work?
If the BIOS is up-to-date, see if biometric support is enabled.
To check your BIOS for biometric support and enable it:
Press the Power button to start the computer, and press the F10 key to open the BIOS setup utility.
Under System Configuration, look for a Biometric Device option; if it exists, enable it.
Press F10 to save this setting and restart the computer.
If a biometric option does not exist in your BIOS, then the fingerprint reader is always enabled. Next, see if Windows supports the fingerprint reader.
Check for Windows support
To see if Windows supports the fingerprint reader on your computer:
Click Start, type device in the search field, and then select Device Manager from the search results list.
Figure : Search results list
In the Device Manager, click Biometric or Biometric Devices to expand the list of recognized biometric sensor devices. The fingerprint sensor is listed as a Validity Sensor or AuthenTec Sensor, depending on the model number of your computer.
Figure : Biometric Validity Sensor
If there is no Biometric entry, then Windows cannot identify the fingerprint reader hardware. This is because the hardware may not be installed on the notebook, or it may be damaged. Contact HP for technical support or repair service.
If there is a Biometric entry, then Windows supports the device.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".