-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Software and How To Questions
- Suggestion which thermal paste should i use

Create an account on the HP Community to personalize your profile and ask a question
11-17-2026 07:29 AM
Hello HP Support Team,
I own an HP Victus 15-fa1327TX gaming laptop with the following specifications:
- Processor: Intel Core i5-13420H
- Graphics: NVIDIA GeForce RTX 3050 6GB
- RAM: 32GB DDR4
- Storage: 1TB SSD
- Laptop age: Approximately 4 years
I have never replaced the thermal paste since purchasing the laptop.
My current gaming temperatures are:
- CPU: 80–89°C
- GPU: 81–85°C
I primarily use my laptop for AAA gaming, and I want to improve its cooling performance and maintain long-term hardware reliability.
I am considering thermal solutions such as ARCTIC MX-4, ARCTIC MX-6, and Honeywell PTM7950.
Could you please clarify the following?
1. Which thermal paste or thermal interface material does HP officially recommend for my exact laptop model?
2. Is Honeywell PTM7950 compatible with both the CPU and GPU of my laptop?
3. Does my laptop require specific thermal pads or thermal putty for the VRAM and VRM components?
4. Should I replace the thermal material on both the CPU and GPU during servicing?
5. Could you provide the original HP thermal-material specifications or compatible replacement part numbers?
I want to use the safest and most suitable thermal solution rather than risk damaging my laptop with an incompatible product.
Thank you for your assistance.
11-17-2026 08:42 AM
Follow below steps if you can. It's super easy if you done it before but that your decision to take if need to accept then risk and confident you can do it. If it's under warrenty or you not that confident then visit nearest HP service center with laptop and it's documents for this job.
Here are steps to do it properly :
Cleaning and repasting the CPU and GPU with PTM7950 or Arctic MX-7 can effectively improving heat transfer and airflow.
I’ll explain this only in short. Before opening your laptop, do your own research on what tools and materials are required and what important precautions need to be taken. Watch disassembly YouTube for your laptop (or a similar HP model) to understand the process. Prepare all necessary items in advance, such as basic tools, PTM7950 or thermal paste, thermal putty (to replace worn thermal pads/putty on VRMs if needed), Cleaning supplies, etc. Again, Do your own research and proceed carefully and at your own risk.
Once opened, disconnect the battery, remove the heatsink assembly, and clean the fans and air vents from both the inside and outside. I don’t have an official video for this exact model, but the video linked below shows what needs to be done. Your heatsink design may differ, but the process is the same: detach it, open it, and clean the fans and vents as demonstrated.
After cleaning, reassemble the heatsink. If the original thermal pads or putty on VRMs are worn or dry, apply new good quality thermal putty first like Thermal Grizzly TG Putty, UPSIREN UX PRO Ultra, Upsiren U6 Pro, etc in place of old thermal pads, or putty as per your laptop, check below video for that to get idea. Then apply PTM7950 on the CPU and GPU (or thermal paste if you not using PTM7950). Use the video guide linked below, follow the thermal putty section if required, otherwise skip ahead and follow the PTM7950 application method.
(For users who are not using PTM7950, Use X method to apply thermal paste properly. Youtube videos on this topic also available)
After completing, apply heatsink carefully, connect battery cable and attach back panel of your laptop.