Uninstall the Thunderbolt software... how can i install again?

[ichiolocco]

Hello Community...

I need to uninstall some applications... and.. for error, I've uninstalled the thunderbolt software... Could you help me?  I have a dock to add HDMI, printer, and 2 USB.

Thanks a lot and in advance.

Ichi

[praveen196]

@ichiolocco Welcome to HP Community!

Please provide the correct product number.

Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: 

Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

http://support.hp.com/us-en/document/c03754824

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[ichiolocco]

Thanks for your answer, i could install but it is not working 😞

Thanks a lot for your patient! I-ve received a new blew screen and 3F0 error.

Best regards

Ichi

[ichiolocco]

And now i can not see de USB-C. For that reason I can not use the monitor or the network updater.

I don't know where look or chek it.

Thanks!

Ichi

[praveen196]

@ichiolocco

Thank you for the update.

Please perform the hard reset and check.

Hard Reset:

1) Shutdown the computer.  

2) Unplug all the Adapter and peripherals connected.  

3) Remove the Battery. ( not for Built-in Battery computer ) 

4) Press and hold down the power button for 15 to 20 seconds.  

5) Plug-in the Adapter and put the Battery back into the computer if it's a (removable battery)

6) Try to turn on the computer and check

Also, please perform the hard drive test.

1) Shutdown the computer.  

2) Turn the computer back on again and repeatedly tap on the ESC until a Startup menu appears.  

3) Press F2 once.  

4) Go to Component test.  

5) From the list, run the Hard Drive (extensive) test.  

If the test is passed, please perform the system recovery.

Have a nice day!!

[ichiolocco]

Thank you very much for your help!

The problem is the temperature of the Intel Core.

I had to install an external application because the machine does not have any of the two HP software to control HP Command Center or HP Cool Sense

The temperature is higher. Now,  it is now between 45°C and 85°C.

I have to take her to see the technical service.

Thanks again