Why my laptop does not switch to power saving mode when unplugged?

[AlphaPhniX]

I have a laptop and currently installed a new windows 11. When i played games on old windows it automatically switches to integrated graphics card and caps FPS to 30 when unplugged but in new windows it does not switch I get same 120FPS even if it is unplugged. Please help I don't want to damage my laptop battery.

[Irfan_06 · Accepted solution]

Hi @AlphaPhniX,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with switching the graphics card automatically while using your Laptop.

Follow the below steps to fix the issue.

A) Perform a power drain on your PC.

1) Unplug the power cord from the PC & wall.

2) Disconnect the power cable from the AC adapter if it is a detachable part and keep it aside.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the AC adapter, then connect it to the wall and to the charging port on your PC.

5) Power on the PC.

B) Update the BIOS for your PC by clicking on the link.

Make sure you keep only the charger plugged in while updating the BIOS for your PC.

Click on the + sign next to BIOS and then download the file.

Open the file and follow the on-screen instructions to complete the update.

C) Install all the pending updates for the Windows operating system following the below steps.

go to Start > Settings > Update & Security > Windows Update and select Check for updates. If the upgrade is available for your device and you want to proceed, download and install it.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support