after replacing battery still receiving message during start up to replace battery.

[ksuttles40]

After clicking start I receive a message that I may need to replace the battery.  I eventually replaced the battery, but I am still receiving the same message.   So I ran a diagnostic tool, cannot remember which one, and received a message that said no battery is installed.  I have also tried resetting the BIOS.

Thanks in advance!

Ken

[Riddle_Decipher]

@ksuttles40 Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

Meanwhile, 

 I have a few steps listed below that should help you resolve this concern:

Unplug the charge, Turn off the laptop and turn it back on after 30mins.

Reinstall Microsoft ACPI-Compliant Control Method Battery under device manager:

1) In the search box, type and open “Device Manager”.

2) Expand “Batteries”.

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.

4) Click on “Uninstall”.

5) At the prompt put a check in the box to remove the current driver

6) Shutdown the computer.

7) Remove the battery for a minute and then put it back in. (Skip this step if you have a non removable battery)

8 - When the computer comes back up it should automatically find the driver.

9) Go to Device Manager.

10) Expand Batteries.

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.

12) Click "Search automatically for updated driver software"

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.

If the issue persists, run a battery and adapter test using the steps mentioned in this link: Click here

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!