pci data acquisition and signal processing controller

[MrKerwyn]

Hello!

Cannot find a driver for my HP ProBook 430 G5.

Device: pci data acquisition and signal processing controller

When I'm trying to install driver for win10, there is a message: This computer does not meet the minimum requirements for installing the software. I understand, that my OS is win7, so maybe you can help me to find drivers?

Thank you!

[Paul_Tikkanen · Accepted solution]

Hi:

Your PC is not supported by Intel, Microsoft or HP for W7.

Isn't the graphics not working?  There is no W7 graphics driver.

There will be a device listed under the display adapters device manager category labeled as a Standard VGA Adapter.

Without the graphics driver, you will not be able to:

Adjust the screen brightness (will be stuck on maximum)

Adjust the screen resolution

Enable graphics acceleration

Put the PC in sleep mode

The device you are missing could be installed by one of two drivers, so try both of these...

Intel chipset installation utility.  The 2nd file down on the left side of the webpage is the auto install file.

https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-?pr...

If that driver doesn't work, then this is the only W7 driver I know of for the DPTF...

This package contains the driver that enables the Intel Dynamic Platform and Thermal Framework firmware. Intel Dynamic Platform and Thermal Framework provide system temperature and power utilization information for the system thermal protection to function properly. This package is provided for supported notebook models running a supported operating system.

http://ftp.hp.com/pub/softpaq/sp75501-76000/sp75506.exe

[MrKerwyn]

Thanks for your help. The last link was really helpful.

[Paul_Tikkanen]

You're very welcome.