cancel
Showing results for 
Search instead for 
Did you mean: 
Hemant900
New member
1 0 0 0
Message 1 of 4
200
Flag Post
HP Recommended

plug in but battery is not charging

[edited]
Microsoft Windows 10 (64-bit)

plug in but battery is not charging

3 REPLIES 3
HP Support Agent
HP Support Agent
11,972 11,952 794 788
Message 2 of 4
144
Flag Post
HP Recommended

plug in but battery is not charging

@Hemant900

 

To assist you better please provide me with the complete Notebook Model or Product Number

 

You can refer to this Link: hp.care/2bygf7l for help in locating the Product Number.

 

Thank you

KrazyToad
I Am An HP Employee

Reply
0 Kudos
AymanGamil
New member
2 1 0 0
Message 3 of 4
104
Flag Post
HP Recommended

plug in but battery is not charging

My battery not charging 0%

Model hp 15-ay111nx

Give drive software to fix it 

Reply
0 Kudos
HP Support Agent
HP Support Agent
17,924 17,833 1,022 1,126
Message 4 of 4
40
Flag Post
HP Recommended

plug in but battery is not charging

@AymanGamil

 

Welcome to HP support community.

 

I have a few steps listed below that should help you resolve this concern: 

Unplug the charge and use the laptop until the battery drains to 15%. 

Turn off the laptop and turn it back on after 30mins. 

Reinstalled Microsoft ACPI-Compliant Control Method Battery under device manager: 
1) In the search box, type and open “Device Manager”.  

2) Expand “Batteries”.  

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.  

4) Click on “Uninstall”.  

5) At the prompt put a check in the box to remove the current driver  

6) Shutdown the computer.  

7) Remove the battery for minute and then put it back in.  

😎 When the computer comes back up it should automatically find the driver.  

9) Go to Device Manager.  

10) Expand Batteries.  

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software"  

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.  

Restart the computer and the issue should be fixed. 

 

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation