webcam problem

[samirjabbar]

error no camera are attached error code 0xa00f4244

[Riddle_Decipher]

@samirjabbar Check the anti-virus program settings & ensure it isn't blocking the camera and the same should resolve the issue, if this doesn't help, try the below steps:

here's a few steps to resolve the issue, start with checking for the webcam kill switch (if available on your model, if not: click here & follow the steps) and ensure its turned on,

That said, If your webcam has stopped working after installing a new update, you should uninstall the update and roll back to the older version. You will have to open Device Manager > right-click on the device > select Properties > switch to Driver tab > click on Roll Back Driver button > select Yes on the next window. After that, you need to restart your PC to check whether it is working.

If that doesn't work or there were no updates before the issue occurred, you might need to uninstall the webcam driver.

To do this, open Device Manager > right-click on the device > select Properties > switch to Driver tab > click on Uninstall Device button.

Restart your computer and then open Device Manager again and click on Action > Scan for hardware changes. (this would automatically reinstall the best drivers for it)

Once done, I suggest you install all the latest pending Windows updates as below and check if it helps.

1. Go to “settings” and click on “update and security”.
2. Under tab “Windows update”, click on the icon “check for updates”.
3. Then once you find the pending updates install it and check.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[samirjabbar]

Hello sir, i really appreciate your interaction and effort to help me!

i want to inform you that i already tried this steps and instructions without result. and i don't know where's the problem, even the camera driver didn't exist in the device manager.

thanks !

[Riddle_Decipher]

@samirjabbar If the drivers for the Imaging devices, which include the webcam, are not displayed in the Device Manager, here's all you need to do, to resolve this issue, once and for all, Learn how to restore an HP webcam in Windows Device Manager

1. Restart your computer.

   If the problem persists, continue using these steps.

2. In Windows, search for and open Device Manager.

3. If there is no Imaging devices category listed, select Action, then Scan for hardware changes.

   

4. If Device Manager does not recognize the webcam after the scan, use Microsoft System Restore to go back to a time when the webcam was working properly.

   If problems persist, the webcam might have become unplugged internally, and the computer might require service to correct the issue.

Keep me posted with the results,

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.