Showing results for 
Search instead for 
Did you mean: 
New member
2 0 0 0
Message 1 of 1
Flag Post

Cursor moves on it's own in Setup Menu/Info screen

HP Recommended
Exampl EliteBook x360 1030 G3
Microsoft Windows 10 (64-bit)

I bought a broken EliteBook x360 1030 G3 from someone. He thought the system board had a problem, so I changed the system board. When I started it up, I noticed the cursor moves on it's own in the Setup Menu/Info Screen. Yet, when I use a USB running Ubuntu, or WinPE, the cursor is fine, 


Is this issue a system board, BIOS firmware, or hardware? Do I need a new touch pad, or firmware. Also with firmware, do I install the newest or install all of them in sequence. I thought with firmware, you install the latest because the fixes are  accumulative. But I also heard that you stick to the firmware that works, and unless there is a problem, you don't need to upgrade.

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation