Envy x360 screen goes black randomly in tablet mode

[Problemsbugme]

Just as the title suggest, my newly purchased 2 in 1 laptop's screen randomly goes black when I use it in tablet mode. Sometimes it goes black immediately after I fold it 360° locked in place, sometimes it goes black in intervals. To un-blacken the screen I have to flip the screen to around 90° from the 360° position and the screen would go back to where it was before it blacked out. This disturbs my writing process and I'm gradually losing patience. I have turned off every possible sleep option and tried a hard reset, nothing seems to be working. Any help will be gladly appreciated!

[Nirvana_95]

Hi @Problemsbugme

Welcome to the HP Support Community. Thanks for bringing this to our notice.

I see that you are facing black screen-related issues on your system. Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:

• Did this happen after a recent window or software update?
• Did you make any changes on the settings of your PC prior to the issue?
• When was the last time it worked fine?

While you respond to that, let's try these steps: 

Hard Reset: 

Follow the steps from the link: https://hp.care/2GnkMa8. (do not skip any troubleshooting steps even if you feel steps are repeating)

BIOS default:

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping. 

[Nirvana_95]

Hello!

We haven’t heard from you in a while, this post is with reference to the thread you had created at your  

friendly neighborhood (HP Support Community). 

I would like to know if the resolution we provided worked for you? If you have any other queries, feel free to reply at any time, and thank you for being a valuable member of our HP Family. 

If you would like to thank us for our efforts to help you, go to the public post & give us a virtual high-five by clicking the "Thumbs Up" icon below, followed by clicking on the "Accept as solution" on my public post. 

Have a great day ahead! 

[Nirvana_95]

Hi @Problemsbugme 

I hope you are doing good.

We reached out but never heard back. Do you still need assistance? Let me know if there is anything else you need assistance with.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping. 

Have a great day! 

Thanks!