HP TouchSmart 7320 PC

[3ULDUZ]

Hello. The HP TouchSmart 7320 PC displays the HP logo. Press the esc key for startup menu

[Lil_Boy_Blue]

Hi
First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat

AND/OR - Power on your PC, press Esc (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).
AND/OR
HOW DO I USE DIAGNOSTICS?

HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The tool runs within the Windows operating system in order to diagnose hardware failures. HP PC Hardware Diagnostics Windows comes pre-installed on new HP computers, but if not on yours, download here:- http://ftp.hp.com/pub/softpaq/sp93001-93500/sp93457.exe

[3ULDUZ]

[3ULDUZ]

I did everything you said, but again the screen is the same.

[Lil_Boy_Blue]

So the hardware passed test.

Next is software, read thru and consider any actions you may take....

From 2016 onwards there is a possible recovery option via the cloud...
HP Consumer PCs - Using the HP Cloud Recovery Tool (Windows 7 & 10)
https://support.hp.com/us-en/document/c06162205
OR
This First part only works when a valid Recovery Partition is enabled.

If it displays an error message then move onto the Second part,
OR if you have data you wish to try and save using the XCOPY command.
Then create your own Repair/Recovery/Rebuild/Re-install media or buy a set from HP.

Turn off the computer.

Disconnect all connected devices and cables, Media Drives, USB drives, printers, & faxes.
Remove media from internal drives, and remove any recently added internal hardware.
Do not disconnect the monitor, keyboard, mouse, or power cord.

Turn on the computer and repeatedly press the F11 key, about once every second,
until the Choose an option screen is displayed, and then continue.

On the Choose an Option screen, click Troubleshoot, and work your way through the screens.

Second Part:-
This may require another PC. Find and Download your .iso from…
(You will need a NON_OEM key for W7;
W8.x and W10 should activate automagically from their embedded licence key.)

https://www.microsoft.com/en-us/software-download/windows7
https://www.microsoft.com/en-us/software-download/windows8ISO
https://www.microsoft.com/en-us/software-download/windows10

For when it’s a NON MS OS ( iOS / Linux ) creating the install media.
www.microsoft.com/en-us/software-download/windows10ISO

A 3rd party site like…
https://www.heidoc.net/joomla/technology-science/microsoft/67-microsoft-windows-iso-download-tool

Expand/Extract/Burn the iso Image onto a DVD/USB as needed.
Microsoft’s Creator Tool will make the required DVD or USB.

Even though it has NO actual HP software/drivers included, you may be able to
XCOPY the C:\Users\* area onto a ‘large’ USB stick, via the Command Prompt.

You’ll need to try various drive letters; D:..-..Z: until it’s matched - could be G; mine’s S:

C:\>XCOPY C:\Users\* S:\ /e /i /h (then files like those 3 listed below get copied over)

C:\Users\desktop.ini
C:\Users\All Users\agent.1509128044.bdinstall.bin
C:\Users\All Users\HP Deskjet 2540 series\Help\flash\zoom.swf

Then you can try System Recovery Options / Advanced Options shown in the screenshots.

NB:- W7 Try running a Startup Repair more than once for a full fix.
NB: - W10 Begin with the Automatic Repair, then Startup Settings etc.

From either the C:\ or the X:\ prompt try the following

cd boot
bootrec /FixMBR
bootrec /FixBoot
bootrec /RebuildBCD

If the above FAILS then please try:-
http://www.thewindowsclub.com/repair-master-boot-record-mbr-windows
http://www.thewindowsclub.com/install-windows-7-from-usb
http://www.thewindowsclub.com/install-windows-10-from-usb

[3ULDUZ]

keyboard cannot take any action

[Lil_Boy_Blue]

How did you run the Diagnostics without a working keyboard?

[3ULDUZ]

I sent pictures to you. When I turn on the computer, it just stays on the screen like in the picture. I can not do anything

[Lil_Boy_Blue]

Please try to be accurate and honest.

""I did everything you said, but again the screen is the same.""

"I sent pictures to you. When I turn on the computer, it just stays on the screen like in the picture. I can not do anything"

So what you have is a Paper Weight and not a Personal Computer.

Last chance if this does not work, take it somewhere and pay for exactly the same help as you got here.

Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds.
Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.

Hopefully one of these documents will cover (and solve) your problem...

https://support.hp.com/ca-en/document/c00042629

https://support.hp.com/us-en/document/c02693833

Turn off the computer, and then connect the power cord.
Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds.
Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.
The HP BIOS Update screen displays and the recovery begins automatically. Follow any on-screen prompts to continue the startup to complete the recovery.
HP BIOS Update recovery in progress

If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next step to install a BIOS recovery file from the HP website.
If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the button for only 2 to 3 seconds.