cancel
Showing results for 
Search instead for 
Did you mean: 
kenmarkusa
New member
2 1 0 0
Message 1 of 3
114
Flag Post

HP USB-C Dock G5 Connected to Samsung TV thru HDMI or Display Port pushes no signal to TV

HP Recommended
Spectre i7 x360 15" Notebook with USB-C Dock G5
Microsoft Windows 10 (64-bit)

When hooking a long HDMI cable from my Samsung TV on HDMI port 4 to my new laptop thru the USB-C Dock G5 to either the 2 Display Ports or the 1 HDMI port, it doesn't show my laptop desktop on the TV as it did with my old laptop. The TV Source program will say there is "No Signal" and if I unplug the HDMI cable from the Dock, then it will say "No Cable". If I plug directly into the onboard laptop HDMI port then it will display my desktop on the TV with no problem.  Unplugging the cable to the Dock will cause the laptop display to refresh because it senses the change in the second display.  When I have a regular HDMI Monitor plugged into Dock, it duplicates and/or extends the laptop display with no issue.

 

Is there a refresh rate issue or something else?

2 REPLIES 2
banhien
Level 19
Level 19
90,470 90,347 11,617 24,908
Message 2 of 3
Flag Post
HP Recommended

@kenmarkusa 

 

I do not have a Samsung TV to test. I used my Panasonic TV's (one 12yrs old 60" Plasma FHD and one 4yrs old 65" 4K LED) they all work.

 

Please try to update firmware for the dock

         https://support.hp.com/au-en/drivers/selfservice/hp-usb-c-dock-g5/27767205

 

Hope this helps

 

Note: my machine is HP Elitebook 840 G5 using Thunderbolt™ 3 port.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



kenmarkusa
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

I updated the USB-C Dock G5 Firmware which was already updated except for an audio driver which I installed today.

HP-USB-C-Dock-G5-Audio-Driver-Update-v6.3.9600.205_05272019_sp96688.exe

This had no affect on the problem at hand.

Plugging into the laptop HDMI works but not in the USB-C Dock G5 Display Ports (x2) nor HDMI ports.

I have since taken my second Dell S2440L 24" LED Monitor and plugged it into all three video ports of the Dock and it immediately recognizes the Dell Display is connected and sets in up as an extended display of the laptop display.

So, the Dock appears to be working for all three ports for a standard LED Monitor.

 

The TV is a current 2014 Model:

Samsung SmartTV 3D 4K Curved UHD LED HDTV 55" Series 9000 4 HDMI WIFI

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation