-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Video, Display and Touch
- Re: Keyboard backlight timeout

Create an account on the HP Community to personalize your profile and ask a question
04-12-2019 11:21 PM
Is there anyway to adjust keyboard backlight timer on the gem cut x360 15 inch? If I don't touch the keyboard for 30 sec - the backlights go off.
The only three modes seem to be - off, dim with off timer and bright with off timer. As far as I can tell, there is no way to keep the keyboard backlight on without a timer. This makes working in a dark room (as I often do at night) incridibly inneficient. I have to scramble to keep typing before the lights go out.
I just received this laptop today but if I am not able to adjust - I will likely return it. For something that costs so much - I would expect to have a bit more control over the settings.
04-13-2019 12:28 AM
Please use section The backlight stays on for only a few seconds on the following article
https://support.hp.com/si-en/document/c01612362
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
04-13-2019 12:34 AM
On some Spectres there apparently is a setting in BIOS under Configuration tab:
http://h20574.www2.hp.com/Media/97AE6F1A-F746-48F4-A660-29D8242B001E/System.html
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
04-13-2019 10:19 PM
Did you check in BIOS under Configuration tab? If it isn't there, I agree that is irritating. I had an X2 model a few years ago that had no way to adjust it. Of course tapping the spacebar made it immediately come back on but was a tad annoying.
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***