My power button is blinking but not powering on

[Britbrat2293]

Power button blinking but not coming on

[zoey7886]

@Britbrat2293, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding Blinking Power Button! 

We're thrilled to have the opportunity to assist you and provide a solution.  

When your HP computer's power button is blinking but not powering on, it may indicate that the computer is in a power-saving state like Sleep or there may be an issue that needs troubleshooting. Here are some steps you can try:

Check the Power Source:

• Ensure that the power cord is properly connected to the wall outlet and the computer.
• If you're using a laptop, make sure the battery is properly installed and charged. You can also try using the laptop without the battery if it’s removable and just plugged into AC power.

Perform a Hard Reset:

• Disconnect all peripheral devices such as USB drives and printers.
• Remove the battery if it’s a laptop (skip this step for devices without a removable battery).
• Press and hold the power button for at least 15 seconds.
• Reconnect power and try turning on your computer again.

Inspect for Hardware Issues:

• Listen for any unusual noises (beeps) which could indicate a hardware issue.
• Try connecting the computer to an external monitor to test whether the issue might be related to the built-in display.

Test with Another Power Adapter:

• If possible, test with a different power adapter to rule out the possibility of a faulty adapter.

Consult the Indicator Lights:

• Refer to your device's manual for more information about what a blinking power button might indicate. Different patterns (e.g., the number and speed of blinks) might convey different diagnostic information.  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,