My wifi button continuously blinking blue. It does not connect to the wifi despite turning it off

[ColourItGrey]

I am trying to finish setting up the printer but unable to register. It does not connect to the wifi at all. It just continuously blinking and I cannot stop it despite turning the wifi and printer off

[Nal_NR]

Hi @ColourItGrey,

Welcome to the HP Support Community. 

I understand that you are facing connectivity issues. I’d like to help!

Make sure, your printer and your device are on the same network as 2.4GHZ only. 

 Try the steps below to connect your printer to the network.:-

-->On the printer control panel, press and hold the Wireless button and the Resume button together for three seconds. (When Wi-Fi Direct is turned on, the Wi-Fi Direct icon on the display stays on)  
--->On your computer or phone go to wifi and connect it to your printer 
--->Select your printer with DIRECT in the name from the list of available networks (example: DIRECT-74-HP Deskjet2700).
--->Select the Wi-Fi Direct printer signal in Wi-Fi settings 
--->If prompted for a password, type 12345678. This is the default password to log in.
--->Now open a browser and type 192.168.223.1
--->you will be able to access the printer's EWS page 
--->on the page, you will find a network or you can also type your network name
--->go to wireless and select wireless setup wizard
--->now select the network that you want your printer to connect to and type in the password 
--->the printer will have solid blue light if it's connected 
--->then connect your phone back to your network

Hope this helps! Keep me posted for further assistance.

 Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.