07-15-2019 11:35 AM - edited 07-15-2019 11:35 AM
I recently updated my Elitebook 820 G3 to Windows 10 1903. After updating I noticed that my trackpoint and associated mousebuttons on top of touchpad are no longer working. I removed Synaptics driver and after reboot both touchpad and trackpoint will work but without proper multitouch. When I re-install driver from https://support.hp.com/us-en/drivers/selfservice/hp-elitebook-820-g3-notebook-pc/7815289/model/78152... trackpoint and top mousebuttons will again stop working.
I can still adjust Synaptics TouchStyk settings from Mouse Properties but they have absolutely no effect on anything. TouchPad on the other hand seems to be working just fine.
Windows 10 1903 64bit, build 18326.239
Synaptics Driver: 22.214.171.124
If anyone has info on driver version that works, I would appreciate it.
Solved! Go to Solution.
07-16-2019 03:37 AM
Same here with Elitebook 840 G3 and 850 G3
I found a workaround rolling back Synaptics Driver to version 126.96.36.199
It seems to be an issue with latest version of Synaptics Driver
07-16-2019 02:54 PM
Thanks for the tip!
Problem seems to indeed be newest Synaptics driver, Windows update must have updated that as well at some point. Only difference from your solution is that I found only version 188.8.131.52 but that seems to work as well.
07-21-2019 02:59 AM - edited 07-21-2019 03:01 AM
Hello, I have the same problem on my HP 840 G3. I was reinstalling windows, and installed Synaptics drivers "184.108.40.206 Rev.A" from HP site. Then I noticed, trackpoint is not working. I uninstalled Synaptics drivers and waited for windows to install his own drivers. Trackpoint has started to work, but like @up said, I lose multitouch. After few minutes, windows installed Synaptics automatically, and trackpoint stop worked again.
I will check with X.69/68
08-06-2019 05:06 PM
HP obviously took notice of Golf5367's comment and removed the driver.
I was reinstalling an EliteBook 840 G2 and the driver site still recommends 220.127.116.11 Rev.A, but the download link does not work. The G3 version has the same link. As I was doing a new installation I could not rollback to 18.104.22.168.
The 840 G4 page recommends 22.214.171.124 Rev.A so I tried. It seems to work, and has multi-touch. If I ask Windows to update the driver, it says that windows has determined I have the best driver installed. The rollback solution seems better to me, but this is an alternative worth trying if you don't have that option.
08-07-2019 04:39 AM
Very impressive! I reported that the drivers site did not have a link to a valid driver a few hours ago. Now it doe have a valid link to 126.96.36.199 RevA. I can put that on my machine!
Thanks to the HP staff who do obviously read this forum and act if possible.
08-20-2019 08:23 AM
Mine was an Elitebook 820 g2 for which the drivers are at
Make sure you are in the download area for the PC model you are using. Different hardware needs different drivers for optimum performance.
The Synaptics driver was under Driver-Keyboard, Mouse and Input Devices where there is a Synaptics Mouse Driver entry.