Trackpad is Non-Responsive After First Power-Up

[Tom92024]

My tackpad never responds (at all) after a power-up. Every single time, I have to reboot it, and then, the trackpad will work perfectly, indefinitely. Same is true every time I come-out of "Hibernate."

The only time it works correctly is when I come out of "Sleep."

So, it appears that the problem is related to the power truly being off, since rebooting, or coming out of "Sleep" both work correctly.

I would appreciate any suggestions!

[TEJ1602]

@Tom92024, Welcome to HP Support Community!

First, restart the computer and tap on F10 during restart, once on BIOS screen, move the mouse cursor around to check if it works normally, 

If it does, it would confirm a software issue and you follow the below steps if it doesn't work on its a hardware failure and I would suggest a touchpad replacement. 

 
I recommend you to uninstall any generic synaptic drivers showing up for the touchpad (if available) under hidden devices from the device manager: 

• Click Start, point to All Programs, point to Accessories, and then click Command Prompt. 

• At a command prompt, type the following command , and then press ENTER: 

set devmgr_show_nonpresent_devices=1 

• Type the following command a command prompt, and then press ENTER: 

start devmgmt.msc 

• Troubleshoot the devices and drivers in Device Manager. 
  NOTE: Click Show hidden devices on the View menu in Device Manager before you can see devices that are not connected to the computer. 

• When you finish troubleshooting, close Device Manager. 

• Type exit at the command prompt. 
   
  Note that when you close the command prompt window, Window clears the devmgr_show_nonpresent_devices=1 variable that you set in step 2 and prevents ghosted devices from being displayed when you click Show hidden devices. 

And then download a new version of the synaptic drivers using this link: Click here.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!