cancel
Showing results for 
Search instead for 
Did you mean: 
BrokerMarco
New member
1 0 0 0
Message 1 of 2
158
Flag Post

add 2 external monitors

HP Recommended
HP Envy 17 t-cg100
Microsoft Windows 10 (64-bit)

How can I add 2 external monitors to a HP Envy 17 t-cg100

1 REPLY 1
banhien
Level 19
Level 19
94,860 93,517 12,291 26,126
Message 2 of 2
Flag Post
HP Recommended

@BrokerMarco 

 

It is a CTO machine. It should have following ports

 

  • HP Smart Plug AC adapter
  • Audio-out (headphone)/ Audio-in (microphone) combo jack
  • High-definition multimedia interface (HDMI) v.2.0 + HDCP 2.2 supporting up to 4096 × 2160 at 60 Hz
  • Hot plug/unplug and autodetect for correct output to wide-aspect vs. standard aspect video (auto-adjust panel resolution to fit embedded panel and external monitor connected)
  • USB 3.2 Gen Type A ports (3); two on left side, one on right side; supports HP Sleep & Charge (right side)
  • USB 3.2 Gen 1 Type-C port (supports data transfer, Power Delivery 3.0, Type-C adapter,

You should be able to use 2 external monitors using HDMI port and compatible adapter for USB-C port. I believe your machine also is compatible USB-C Gen 5 (supports up to 100W.

 

Note: your machine requires 65W or 90W charger

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation