-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Video, Display and Touch
- power issue

Create an account on the HP Community to personalize your profile and ask a question
11-06-2026 05:26 PM
My laptop screen turns on and off by itself, but my external monitor works perfectly; furthermore, sometimes when I try to turn the computer back on after shutting it down, it doesn't respond at all when I press the power button.
11-06-2026 06:05 PM
Hi @vardaturan,
A display that turns off while the external monitor keeps working, plus times when the Victus 16 doesn't power on, points to either a power/firmware state problem or the internal display connection.
Option 1 – Hard reset and BIOS/graphics update
- Shut down, unplug the charger and all devices, hold the power button 30 seconds, then connect only the charger and turn it on.
- Install the latest BIOS and graphics drivers for the Victus 16-s0000 from https://support.hp.com/drivers (or HP Support Assistant).
Option 2 – Test the hardware
- Power off, press Esc repeatedly while turning on > F2 > System Tests > Quick Test, then Component Tests > Video.
- If the screen also flickers off in that test (outside Windows), it's hardware (display cable/panel).
If diagnostics fail or the no-power issue repeats, check warranty (https://support.hp.com/check-warranty) and contact HP: https://support.hp.com/contact-hp
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).