• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP Pavilion dv6000
Microsoft Windows 7 (64-bit)

I have been trying to locate the correct network adapter driver (the wired network, not wireless, that works fine) for Windows 7 for this laptop.

 

I've tried the drivers from nVidia (several of the legacy/nForce drivers) but in Device Manager it always says "This device cannot start. (Code 10)" (this is for the "NVIDIA nForce Networking Controller" entry, and likewise it errors the same for the HP ones I've tried.

 

Here's the list I've already gone through:

 

HP:

* sp45169.exe (doesn't error but doesn't show up anywhere)

* sp48125.exe (fails "not for your system" - looks like it's Vista-only)

 

NVidia:

* 15.23_nforce_winvista64_international_whql.exe

* 15.58-nforce-winvista-win7-64bit-international-whql.exe ()

 

In the device manager, the following info is shown about the adapter:

 

Hardware IDs:

PCI\VEN_10DE&DEV_054C&SUBSYS_30CF103C&REV_A2
PCI\VEN_10DE&DEV_054C&SUBSYS_30CF103C
PCI\VEN_10DE&DEV_054C&CC_020000
PCI\VEN_10DE&DEV_054C&CC_0200


Device Instance Path:

PCI\VEN_10DE&DEV_054C&SUBSYS_30CF103C&REV_A2\3&2411E6FE&1&50

 

Any ideas?

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi:

 

This driver should work...

 

This package provides the driver for the NVIDIA nForce AR Chipset in the supported notebook models and operating systems.

File name: sp37730.exe

 

Here is a partial copy and paste of the ethernet driver folder setup information file which shows this driver supports that hardware ID.

 

[Manufacturer]
%Nvidia%    = Nvidia,NTamd64

[Nvidia.NTamd64]
          
%NVENETFD.DeviceDesc%  =  NVENET65.NDI,          PCI\VEN_10DE&DEV_0450
%NVENETFD.DeviceDesc%  =  NVENET67.NDI,          PCI\VEN_10DE&DEV_054C       

 

You may also want to read through this dv6000 Windows 7 upgrade guide for more tips on how to get W7 to work on your PC.

 

http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/Windows-7-Upgrade-Guide-for-dv6000-dv9000-mo...

View solution in original post

3 REPLIES 3
HP Recommended

Hi,

 

Machine is very old. Vista driver should work but please try:

 

        ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45169.exe

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended

Thanks very much for the reply, but no dice.

 

The installation from that file (sp45169.exe) completes and says everything is successful but the device still shows with an exclamation point in the Device Manager (and ) and it does not appear in the Network Connections screen.

 

I tried in compatibilty mode for Windows Vista and Windows XP SP3 - same deal.  After trying a few times the installer did pop up once with an error saying something about a 32-bit uninstaller running on a 64-bit system - but since it's talking about the uninstaller, that doesn't seem related.

 

Any other ideas?

 

HP Recommended

Hi:

 

This driver should work...

 

This package provides the driver for the NVIDIA nForce AR Chipset in the supported notebook models and operating systems.

File name: sp37730.exe

 

Here is a partial copy and paste of the ethernet driver folder setup information file which shows this driver supports that hardware ID.

 

[Manufacturer]
%Nvidia%    = Nvidia,NTamd64

[Nvidia.NTamd64]
          
%NVENETFD.DeviceDesc%  =  NVENET65.NDI,          PCI\VEN_10DE&DEV_0450
%NVENETFD.DeviceDesc%  =  NVENET67.NDI,          PCI\VEN_10DE&DEV_054C       

 

You may also want to read through this dv6000 Windows 7 upgrade guide for more tips on how to get W7 to work on your PC.

 

http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/Windows-7-Upgrade-Guide-for-dv6000-dv9000-mo...

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.