Intel Wireless-AC 9560 not working

[Ezza95]

I recently bought my HP Envy 13 aq002na laptop, I updated Windows and the BIOS yesterday and that’s when the problem started. The Intel Wireless AC 9650 network adapter doesn’t work and I cannot connect to any networks. It’s throws out “The device cannot start. (Code 10) {Operation Failed} The requested operation was unsuccessful.” I have tried everything that was suggested on the internet and still no luck

[Lil_Boy_Blue]

Hi
Make, Model and OS please.
SKU: if possible by this method
WinKey + R and type
msinfo32
Read Line 9
System SKU: N6K07EA#ABU

Please do not post Serial Numbers.

First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat

NOW begin checking/testing/proving the Hardware is fit for purpose.

Power on your PC, press ESC (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).
AND/OR
HOW DO I USE DIAGNOSTICS?

HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The tool runs within the Windows operating system in order to diagnose hardware failures. HP PC Hardware Diagnostics Windows comes pre-installed on new HP computers, but if not on yours, download here:- http://ftp.hp.com/pub/softpaq/sp93001-93500/sp93457.exe

If in doubt please ask.