cancel
Showing results for 
Search instead for 
Did you mean: 
Alex_ph
New member
1 0 0 0
Message 1 of 2
245
Flag Post

Laptop won't stay connected to wifi even after rebooting

HP Recommended
HP Notebook 15t-dy100 CTO
Microsoft Windows 10 (64-bit)

 

My laptop won't stay connected to the wifi. Even after I restart it, it gets connected but it will become disconnected again and it won't connect.

When I troubleshoot the problem, the results always show that "Realtek RTL8723DE 802. 11b/g/n PCIe Adapter adapter is experiencing driver or hardware related problems". Everything else that is connected to the wifi works, except my laptop.

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,618 3,995
Message 2 of 2
Flag Post
HP Recommended

@Alex_ph Here's a few steps that should help resolve this issue once and for all:


Reset IP/ TCP

  1. Press and hold the button “Windows” and the button “X”.
  2. From the menu that shows up, you will need to left click or tap on the “Command Prompt (admin)” icon.
  3. Now that you have the command prompt with administrative rights in front of the screen you will need to write the following command: “netsh winsock reset catalog” without the quotes.
  4. Press the “Enter” button on the keyboard.
  5. Write the following command: “netsh int ip reset reset.log hit” without the quotes.
  6. Press the “Enter” button on the keyboard.
  7. Now you will need to restart your Windows 10 operating system.
  8. Check and see if you still cannot connect to your wireless network.

Set WLAN Autoconfig to Automatic

  1. Left click or tap on the “Start” button.
  2. In the Start window you need to write the following: “services.msc” without the quotes.
  3. When the search is finished, left click or tap on the “services.msc” icon that pops up.
  4. Now you have a “Services” window in front of the screen.
  5. Look on the right side panel in this window for “WLAN Autoconfig”
  6. Right click or hold tap on the “WLAN Autoconfig” feature.
  7. Left click or tap on the “Properties” feature for the “WLAN Autoconfig” option.
  8. Left click or tap on the “General” tab situated in the upper side of the “Properties” window.
  9. On the right from the “Startup type”, you will need to left click on the drop-down menu and select “Automatic” feature.
  10. Left click or tap on the “Start” button in this window.
  11. Left click or tap on the “Apply” button.
  12. Left click or tap on the “OK” button.
  13. Close all the windows you opened so far and reboot your Windows 8.1 or Windows 10 device.
  14. Check to see if you have your wireless up and running again.

P.S: Welcome to HP Community 😉

 

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.

Riddle_Decipher
I am an HP Employee

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation