cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
104
Flag Post

My HP Notebook only recognizes Apple iPod Shuffle the iPod has been restored to factory defaults.

HP Recommended
HP Notebook (17-by1061st)
Microsoft Windows 10 (64-bit)
I have an Apple iPod Shuffle that my HP Notebook (17-by1061st) only recognizes when it has been restored to factory defaults. As soon as I load anything on it through iTunes on this notebook or any other computer, the notebook no longer recognizes the device at all. (The iPod works fine on any other computer.)  Any suggestions?
1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
6,792 6,794 269 413
Message 2 of 2
Flag Post
HP Recommended

@ecmarx Welcome to HP Community!

 

I understand that the HP Notebook only recognizes Apple iPod Shuffle the iPod has been restored to factory defaults.

 

Please perform the below steps and check.

 

Hard Reset:

1) Shutdown the computer.  

2) Unplug all the Adapter and peripherals connected.  

3) Remove the Battery. ( not for Built-in Battery computer ) 

4) Press and hold down the power button for 15 to 20 seconds.  

5) Plug-in the Adapter and put the Battery back into the computer if it's a (removable battery)

6) Try to turn on the computer and check, If the issue persists continue next step

 

Set BIOS default and restart:

  1. Restart your notebook.
  2. During startup, press F10 repeatedly until the BIOS menu is displayed.
  3. Once the BIOS menu is displayed, press F9 to restore factory defaults.
  4. Select Yes to confirm.
  5. Press F10 to save changes and exit.
  6. Select Yes to confirm.
  7. The computer restarts using the default settings.

Try updating the computer, this will install the latest updates -

 

Step 1 Windows Updates -

1) In the search box, type, and open Windows Updates.

2) Check for updates.

3) If the updates are available, click on install and restart the computer.

 

Step 2 Install updates using HP Support Assistant

  1. In the search box, type, and open HP Support Assistant. 
  2. Check for updates. 
  3. If the updates are available, click on install and restart the computer.  

Note: If you do not have HP Support Assistant installed, Click here to download the same.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation