Not able to connect to New Router (NETGEAR Nighthawk X6S)

[ohiojack]

Unable to connect to new Router (NETGEAR  (Nighthawk S6X)

[Kumar0307]

Hi @ohiojack

Welcome to the HP Support Community. I'd be happy to assist you.

• Make sure the printer and the MAC are connected to the same wireless network.
• This printer supports only 2.4GHz network. So, the MAC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.
• Also, check with your Internet service provider if your router is able to forward 'Bonjour packets'.
• The wireless status menu on your Mac should also give us quite a lot of information that would help us identify the issue. You can press and hold the option key on your keyboard and click the WiFi icon to get detailed information.

If the issue persists, restart the network devices

1. Turn off the Router, Printer, and the computer/ mobile devices.
2. Wait for 60 seconds.
3. Turn on the Router first and wait for all the lights to stabilize.
4. Turn on the printer and allow it to configure itself.
5. Turn on the computer/ mobile devices.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!