cancel
Showing results for 
Search instead for 
Did you mean: 
MohamedYasserMo
New member
1 0 0 0
Message 1 of 2
167
Flag Post

Type-C to Ethernet

HP Recommended
Probook 430 G8
Microsoft Windows 10 (64-bit)

Hello,

I want to purchase the hp probook G8, and it does not have ethernet port, if i got the hp usb type-c to ethernet converter, can i connect it to a router or a switch and access them normally, or change laptop ip addressing over this connection normally?

1 REPLY 1
banhien
Level 19
Level 19
94,847 93,504 12,287 26,124
Message 2 of 2
Flag Post
HP Recommended

@MohamedYasserMo 

 

Machine should have

 

  • (1) USB 3.1 Gen 2 Type-C port (Power delivery, DisplayPort 1.2)
  • (2) USB 3.1 Gen 1 port (1 charging; 1 powered port)
  • (1) HDMI 1.4b (cable sold separately)
  • (1) Headphone/microphone combo jack
  • (1) AC power input port
USB-C to NIC adapters  should work but I have not test them. I know for sure you can use  USB to NIC. I'm using the following adapter
 
 
I've got 2 more USB 3.0 ports. You can use 3, 4, 5 or 7 ports if you wish
 
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation